No abstract

No abstract

No abstract

The drying of acid whey is hindered by its high mineral and organic acid contents, and their removal is performed industrially through expensive and environmentally impacting serial processes. Previous works demonstrated the ability to remove these elements by electrodialysis alone but with a major concern—membrane scaling. In this study, two conditions of pulsed electric field (PEF) were tested and compared to conventional DC current condition to evaluate the potential of PEF to mitigate membrane scaling and to affect lactic acid and salt removals. The application of a PEF 25 s/25 s pulse/pause combination at an initial under-limiting current density allowed for decreasing the amount of scaling, the final system electrical resistance by 32%, and the relative energy consumption up to 33%. The use of pulsed current also enabled better lactic acid removal than the DC condition by 10% and 16% for PEF 50 s/10 s and 25 s/25 s, respectively. These results would be due to two mechanisms: (1) the mitigation of concentration polarization phenomenon and (2) the rinsing of the membranes during the pause periods. To the best of our knowledge, this was the first time that PEF current conditions were used on acid whey to both demineralize and deacidify it.

With the rising popularity of Greek-style yogurts in the past few years, the production of acid whey has drastically increased. If sweet whey is usually further processed, the acid whey valorization comes with challenges because its drying is jeopardized by its high mineral and organic acid contents. For this reason, prior demineralization and deacidification are usually performed at industrial scale using a combination of ion exchange resins and electrodialysis. This whole process represents large amounts of resources and energy consumption as well as an important production of effluents. The optimization of the electrodialysis technique, currently the focus of a few studies, could result in the replacement of the serial processes and would provide a cost-effective and eco-efficient alternative. In this work, the demineralization and deacidification of acid whey were compared via 2 electrodialysis configurations: one conventional and one using bipolar membranes. Both configurations allowed to reach interesting demineralization (67%) and deacidification (44%) rates. However, even though the appearance of fouling or scaling has never been reported, scalings of different natures were observed on membranes using both configurations. Amorphous calcium phosphate was identified on the anion exchange membranes for both configurations while calcite and brucite were identified on cation exchange ones using the bipolar membrane configuration. These scaling formations were linked to the migration of divalent ions and water splitting phenomenon caused by a high demineralization rate or by an already formed significant scaling.