No abstract

Purpose This paper aims at examining the potentiality of using Hibiscus sabdariffa L. calyces’ (Hs) aqueous extract to remove soot stains from the surface of fire-damaged silver gelatin prints. It further studies the cleaning efficiency and impact of both a contact method and a noncontact method with argon dielectric barrier discharge plasma (DBD Ar. plasma) on the different properties of silver gelatin prints. Accordingly, it prompts using economic, eco-friendly materials and methods in the photograph conservation field. Design/methodology/approach To achieve the aims of this paper, four silver gelatin prints were stained with soot and treated with the (Hs) aqueous extract as a contact method and DBD Ar. plasma combined with the aqueous extract as a noncontact method. The assessment was carried out using digital microscopy, atomic force microscopy and spectrophotometer to study the efficiency of the tested treatments and their impact on the surface of the photographs. FTIR was used to monitor the state of the binder after cleaning. Furthermore, the pH and the mechanical properties were measured. Findings The contact method resulted in lower concentrations of (Hs) extract that efficiently cleaned the surface without causing any stains or damage to the treated photographs. The noncontact method (plasma with an aqueous extract) proved to be less effective in cleaning and made the binder more susceptible to deterioration. Originality/value This paper reveals the success of (Hs) aqueous extract in cleaning soot on vulnerable photographs’ surfaces.

In this paper, the plasma power density and corresponding plasma dose of a low-cost air non-thermal plasma jet (ANPJ) device are estimated at different axial distances from the nozzle. This estimation is achieved by measuring the voltage and current at the substrate using diagnostic techniques that can be easily made in laboratory; thin wire and dielectric probe, respectively. This device uses a compressed air as input gas instead of the relatively-expensive, large-sized and heavy weighed tanks of Ar or He gases. The calculated plasma dose is found to be very low and allows the presented device to be used in biomedical applications (especially blood coagulation). While plasma active species and charged-particles are found to be the most effective on blood coagulation formation, both air flow and UV, individually, do not have any effect. Moreover, optimal conditions for accelerating blood coagulation are studied. Results showed that, the power density at the substrate is shown to be decreased with increasing the distance from the nozzle. In addition, both distances from nozzle and air flow rate play an important role in accelerating blood coagulation process. Finally, this device is efficient, small-sized, safe enough, of low cost and, hence, has its chances to be wide spread as a first aid and in ambulance.

No abstract

No abstract