Abstract:Magnesium is electrochemically the most active metal employed in common structural alloys of iron and aluminum. Mg is widely used as a sacrificial anode to provide cathodic protection of underground and undersea metallic structures, ships, submarines, bridges, decks, aircraft and ground transportation systems. Following the same principle of utilizing Mg characteristics in engineering advantages in a decade-long successful R&D effort, Mg powder is now employed in organic coatings (termed as Mg-rich primers) as a sacrificial anode pigment to protect aerospace grade aluminum alloys against corrosion. Mg-rich primers have performed very well on aluminum alloys when compared against the current chromate standard, but the carcinogenic chromate-based coatings/pretreatments are being widely used by the Department of Defense (DoD) to protect its infrastructure and fleets against corrosion damage. Factors such as reactivity of Mg particles in the coating matrix during exposure to aggressive corrosion environments, interaction of atmospheric gases with Mg particles and the impact of Mg dissolution, increases in pH and hydrogen gas liberation at coating-metal interface, and primer adhesion need to be considered for further development of Mg-rich primer technology.

Maleinized soybean oil (MSO) has been investigated as a flexible, macromolecular crosslinker for cotton fabrics. The ability of MSO to penetrate crystalline cellulose and crosslink aligned cellulose chains upon cure has been in question. This study compares the penetration capability of MSO to dimethyloldihydroxyethyleneurea (DMDHEU), which is the commercial standard for durable press finishing and is an efficient cellulose crosslinker. X-ray diffraction was employed to characterize changes in the crystalline morphology upon heating un-mercerized cotton fabrics treated with aqueous DMDHEU and soybean oil derivatives. Displacement of characteristic interplanar spacings and the genesis/elimination of diffraction intensities from quintessential planes were evidence of structural modification. The penetration of ammonia neutralized MSO (acid value 230.00 mg KOH/g) into the microstructure of cotton cellulose is similar to that of DMDHEU in terms of expanding the interplanar spacings of characteristic planes. Moreover, polymorphism of cotton and mercerized cotton occurred upon treatment with aqueous solutions of MSO. These findings suggest that macromolecular reagents can diffuse into cellulose fibrils if they are sufficiently hydrated or enshrouded by more favored penetrants.

The research objective was to determine whether naturally occurring epoxy functional vernonia oil would result in lower viscosity compounds after converting the virgin oil into the cyclic carbonate using supercritical carbon dioxide as the reactant. The cyclic carbonate was produced using relatively mild conditions as described in the paper. Carbonated vernonia oil retains the characteristic low viscosity of vernonia oil, and offers potential as a valuable, biobased intermediate for synthesizing low viscosity resins.

No abstract

Large-scale industrial applications of barrier films and coatings that prevent permeation of degradative gases and moisture call for the development of cost-efficient and ecofriendly polymer nanocomposites. Herein, we report the facile fabrication of latex nanocomposites (LNCs) by incorporating surface-modified graphene oxide (mGO) at various loadings (0.025-1.2 wt %) into a styrene-acrylic latex using water as the processing solvent. LNCs fabricated with mGO exhibited significant reductions (up to 67%) in water vapor sorption, resulting in greater environmental stability when compared to LNCs fabricated with equivalent loading of hydrophilic, unmodified GO. The assembly and coalescence of the exfoliated latex/mGO dispersions during the film formation process produced highly dispersed and well-ordered mGO domains with high aspect ratios, where alignment and overlap of the mGO domains improved with increasing mGO content. The addition of only 0.7 vol % (1.2 wt %) mGO led to an 84% decrease (relative to the neat polymer latex film) in oxygen permeability of the LNC films, an excellent barrier performance attributed to the observed LNC film morphologies. This work enables ecofriendly development of mechanically flexible mGO/LNC films with superior barrier properties for many industrial applications including protective coatings, food packaging, and biomedical products.