Micro- and nanomotors and their use for biomedical applications have recently received increased attention. However, most designs use top-down methods to construct inorganic motors, which are labour-intensive and not suitable for biomedical use. Herein, we report a high-throughput design of an asymmetric hydrogel microparticle with autonomous movement by using a microfluidic chip to generate asymmetric, aqueous, two-phase-separating droplets consisting of poly(ethylene glycol) diacrylate (PEGDA) and dextran, with the biocatalyst placed in the PEGDA phase. The motor is propelled by enzyme-mediated decomposition of fuel. The speed of the motors is influenced by the roughness of the PEGDA surface after diffusion of dextran and was tuned by using higher molecular weight dextran. This roughness allows for easier pinning of oxygen bubbles and thus higher speeds of the motors. Pinning of bubbles occurs repeatedly at the same location, thereby resulting in constant circular or linear motion.

The aqueous SET-LRP catalyzed with "in situ" generated Cu(0) of the two amphiphilic monomers 2-hydroxyethyl acrylate (HEA) and oligo(ethylene oxide) methyl ether acrylate (OEOMEA) was investigated at temperatures from −22 to +25°C. while the theoretical value would have to be ∼0%. This high experimental chain-end functionality was explained by the slow desorption of the hydrophobic backbone containing the propagating radicals of these amphiphilic polymers from the surface of the catalyst due to their strong hydrophobic effect.Polymer radicals adsorbed on the surface of Cu(0) undergo monomer addition and reversible deactivation but do not undergo the bimolecular termination that requires desorption. This amplified adsorptiondesorption process that mediates both the activation and the bimolecular termination explains the unexpectedly high chain-end functionality of the polymers synthesized by SET-LRP.

Microfluidics is an ideal tool for the design of self‐assembled micromotors. It allows for easy change of solutions, catalysts, and flow rates, which affect shape, structure, and motion of the resulting micromotors. A microfluidic tool generating aqueous‐two‐phase‐separating droplets of UV‐polymerizable poly(ethylene glycol)diacrylate (PEGDA) and an inert phase, salt, or polysaccharide, is utilized to fabricate asymmetric microbeads. Different molecular weights and branching of polysaccharides are used to study the effect on shape, surface roughness, and motion of the particles. The molecular weight of the polysaccharide determines the roughness of the motors inner surface. Smooth openings are obtained by low molecular weight dextran, while high surface roughness is obtained with a high molecular weight branched polysaccharide. Since roughness plays an important role in bubble pinning, it influences both speed and trajectory. Increasing speeds are obtained with increasing roughness and trajectories ranging from linear, circular to tumble‐and‐run depending on the nature of bubble pinning. This microfluidic tool allows for fine‐tuning shape, structure, and motion by easy change of solutions, catalysts, and flow rates.

Micro‐ and nanomotors and their use for biomedical applications have recently received increased attention. However, most designs use top‐down methods to construct inorganic motors, which are labour‐intensive and not suitable for biomedical use. Herein, we report a high‐throughput design of an asymmetric hydrogel microparticle with autonomous movement by using a microfluidic chip to generate asymmetric, aqueous, two‐phase‐separating droplets consisting of poly(ethylene glycol) diacrylate (PEGDA) and dextran, with the biocatalyst placed in the PEGDA phase. The motor is propelled by enzyme‐mediated decomposition of fuel. The speed of the motors is influenced by the roughness of the PEGDA surface after diffusion of dextran and was tuned by using higher molecular weight dextran. This roughness allows for easier pinning of oxygen bubbles and thus higher speeds of the motors. Pinning of bubbles occurs repeatedly at the same location, thereby resulting in constant circular or linear motion.

Nature’s motors are complex and efficient systems, which are able to respond to many different stimuli present in the cell. Nanomotors for biomedical applications are designed to mimic nature’s complexity; however, they usually lack biocompatibility and the ability to adapt to their environment. Polymeric vesicles can overcome these problems due to the soft and flexible nature of polymers. Herein we will highlight the recent progress and the crucial steps needed to fabricate active and adaptive motor systems for their use in biomedical applications and our approach to reach this goal. This includes the formation of active, asymmetric vesicles and the incorporation of a catalyst, together with their potential in biological applications and the challenges still to overcome.