Colloidal quantum dots provide a powerful materials platform to engineer optoelectronics devices, opening up new opportunities in the thermal infrared spectral regions where no other solution-processed material options exist. This mini-review collates recent research reports that push the technological envelope of colloidal quantum dot-based photodetectors toward mid- and long-wavelength infrared. We survey the synthesis and characterization of various thermal infrared colloidal quantum dots reported to date, discuss the basic theory of device operation, review the fabrication and measurement of photodetectors, and conclude with the future prospect of this emerging technology.

Lately discovered silver selenide (Ag2Se) colloidal quantum dots with tetragonal crystal structure exhibit promising optical properties in the mid-wavelength infrared. Although colloidal synthesis of uniform sizes and shapes as well as detailed phase transformation and photoluminescence properties have been studied recently, investigations of their optoelectronic properties as an active layer in photodetector devices remain scarce. Herein, we present the fabrication and characterization of Ag2Se colloidal quantum dot-based photoconductive photodetectors. We investigate the effect of ligand exchange as well as temperature and spectral-dependent photoresponses. Our results suggest that further enhancement in performance could be achieved through accurate control of carrier concentration. With this improvement, Ag2Se colloidal quantum dots may serve as a promising mid-wavelength infrared absorber for the development of thermal infrared sensors and imagers with low size, weight, power consumption, and cost.

Self-catalyzed growth of axial GaAs1−xSbx nanowire (NW) arrays with bandgap tuning corresponding to the telecommunication wavelength of 1.3 µm poses a challenge, as the growth mechanism for axial configuration is primarily thermodynamically driven by the vapor-liquid-solid growth process. A systematic study carried out on the effects of group V/III beam equivalent (BEP) ratios and substrate temperature (Tsub) on the chemical composition in NWs and NW density revealed the efficacy of a two-step growth temperature sequence (initiating the growth at relatively higher Tsub = 620 °C and then continuing the growth at lower Tsub) as a promising approach for obtaining high-density NWs at higher Sb compositions. The dependence of the Sb composition in the NWs on the growth parameters investigated has been explained by an analytical relationship between the effective vapor composition and NW composition using relevant kinetic parameters. A two-step growth approach along with a gradual variation in Ga-BEP for offsetting the consumption of the droplets has been explored to realize long NWs with homogeneous Sb composition up to 34 at.% and photoluminescence emission reaching 1.3 µm at room temperature.

Intraband quantum dots are degenerately doped semiconductor nanomaterials that exhibit unique optical properties in mid- to long-wavelength infrared. To date, these quantum dots have been only studied as lateral photoconductive devices, while transitioning toward a vertically stacked structure can open diverse opportunities for investigating advanced device designs. Here, we report the first vertical intraband quantum dot heterojunction devices composed of Ag2Se/PbS/Ag2Se quantum dot stacks that bring the advantage of reduced dark conductivity with a simplified device fabrication procedure. We discuss the improvement in the colloidal synthesis of Ag2Se quantum dots that are critical for vertical device fabrication, identify an important process that determines the mid-wavelength infrared responsivity of the quantum dot film, and analyze the basic device characteristics and key detector performance parameters. Compared to the previous generation of Ag2Se quantum dot-based photoconductive devices, approximately 70 times increase in the mid-wavelength responsivity, at room temperature, is observed.

No abstract