No abstract

In a previous study, statistical method using two distributions was applied to analyze detergency of oily soil. The method uses statistical distributions of detergent power and adhesive force of soil. In this paper, this method was applied to an analysis of detergency of solid particles. Soiled cotton cloth was prepared with red iron oxide dispersion liquid in Terg-O-Tometer. Four-time consecutive washings tests were conducted with dodecyl sulfuric acid sodium salt (SDS) and alcohol ethoxylate (AE) aqueous solutions in Terg-O-Tometer. Change of removal efficiencies due to repetitive washing was utilized to seek the two distributions. Predicted removal efficiencies calculated from computer simulation corresponded to experimental values. Different adhered states of soil, prepared by varying soiling conditions, were expressed as Removal Resistance. As soiling mechanical power increased, Removal Resistance shifted toward higher adhesive force of soil and an amount of soil had also increased. Iron oxide concentration only had an affect on an amount of soil. The results showed that the method using two statistical distributions can be applied to the detergency of solid particle.

Abstract:We have studied the effectiveness of surface tension on surfactants risk assessment. g tox was defined as surface tension at a point where acute aquatic toxicity of a surfactant emerges. Oryzias latipes, Daphnia magna, and Podocopida were used for acute aquatic toxicity test of 7 surfactants and 3 detergents. g tox values were plotted on surface tension curves, and the effect of water hardness on toxicity and surface tension were examined. Results showed that g tox varies greatly by kind of surfactant or detergent. Therefore, aquatic toxicity cannot only be explained by surface tension. The change of aquatic toxicity with varying water hardness, however, could be explained by the change of surface tension. Aquatic toxicity of LAS (Linear Alkylbenzene Sulphonate) increased and aquatic toxicity of SOAP decreased with an increase of water hardness, but both g tox , values were constant. Aquatic toxicity was decreased by an addition of mud soil as adsorbent into surfactant solution. The toxicity change can be explained by the surface tension since g tox value of solution with and without mud soil were equal. These results showed that the change of aquatic toxicity of a surfactant caused by water property, such as water hardness, could be explained by the change of surface tension.