We have developed a new beam injection system with a single pulsed sextupole magnet (PSM) at the photon factory storage ring (PF ring) in the High Energy Accelerator Research Organization. We demonstrated beam injection with this system and succeeded in storing a beam current of 450 mA, which is the normal operating beam current of the PF ring. Top-up injection was also achieved. Coherent dipole oscillation of the stored beam and fluctuation of photon intensity observed at synchrotron radiation beam lines during the PSM injection became very small compared with a pulsed bump injection system that is normally used in the beam injection at the PF ring. This experiment is the first demonstration of beam injection using the PSM in an electron storage ring.

No abstract

We demonstrated a new injection scheme using a single pulsed quadrupole magnet (PQM) with no pulsed local bump at the Photon Factory Advanced Ring (PF-AR) in High Energy Accelerator Research Organization (KEK). The scheme employs the basic property of a quadrupole magnet, that the field at the center is zero, and nonzero elsewhere. The amplitude of coherent betatron oscillation of the injected beam is effectively reduced by the PQM; then, the injected beam is captured into the ring without largely affecting the already stored beam. In order to investigate the performance of the scheme with a real beam, we built the PQM providing a higher field gradient over 3 T=m and a shorter pulse width of 2:4 s, which is twice the revolution period of the PF-AR. After the field measurements confirmed the PQM specifications, we installed it into the ring. Then, we conducted the experiment using a real beam and consequently succeeded in storing the beam current of more than 60 mA at the PF-AR. This is the first successful beam injection using a single PQM in electron storage rings.

No abstract

No abstract