Polymer flooding has been the most widely used chemical enhanced oil recovery (EOR) method. The experience gained over the past decades from laboratory studies to project design and field implementation has been well documented in the literature. The main objectives of this paper are to evaluate recent observations of polymer floods that report injection rates leading to pressure values above the formation fracture pressure (FFP), high polymer production, formation of tight emulsions and/or productivity losses.Based on this review, it can be concluded that no direct evidence exists to support that injecting polymer above the FFP will lead to more polymer production. However, uncertainties associated with the estimation of fracture propagation/dimensions using pressure Fall-Off Tests (FOT) still remain. High polymer production, other than severe channeling, is generally reported in large scale/commercial projects. The impact of oil geochemistry/ composition and water salinity on oil-water-polymer emulsions is commonly overlooked in polymer flood studies. The formation of in-situ emulsions can also explain the injectivity and/or productivity reduction and well test interpretation (i.e. FOT) reported in polymer floods. It was also identified that the OPEX (Operational Expenditures) associated with oil-water separation in the presence of polymer and productivity losses (i.e. workovers, stimulation costs) are generally underestimated. Finally, this review is expected to contribute with the planning, design and implementation of future polymer flood pilots and field expansions. OBSERVACIONES HISTÓRICAS Y RECIENTES EN INYECCIÓN DEPOLÍMEROS: REVISIÓN ACTUALIZADA. OBSERVAÇÕES HISTÓRICAS E RECENTES DE INJEÇÃO DE POLÍMEROS:REVISÃO ACTUALIZADA. EDUARDO MANRIQUE et. al. 18 L a inyección de polímeros es el método químico de recobro mejorado con mayor número de implementaciones a escala de campo. La experiencia adquirida en las últimas décadas desde estudios de laboratorio hasta el diseño e implementación de campo ha sido bien documentada en la literatura. El objetivo principal de este trabajo es evaluar observaciones recientes de proyectos de inyección de polímero reportando tasas de inyección por encima de la presión de fractura de la formación, alta producción de polímero, formación de emulsiones viscosas y/o pérdidas de productividad.Basados en esta revisión, se puede concluir de que no existen evidencias directas de que la inyección de polímero a tasas que impliquen superar la presión de fractura induzcan a una mayor producción de polímeros. Sin embargo, existen incertidumbres relacionadas con la estimación de las dimensiones y propagación de fracturas utilizando pruebas de caídas de presión (FOT). La alta producción de polímero, por razones diferentes a canalizaciones severas, generalmente se reportan en proyectos a escala comercial. Por otra parte, el impacto de la composición y geoquímica del crudo y de la salinidad del agua en la formación de emulsiones agua:petróleo:polímero ha sido subestimado en estudios de in...
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
customersupport@researchsolutions.com
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.