Thermoelectric technology generates electricity from waste heat, but one bottleneck for wider use is the performance of thermoelectric materials. Manipulating the configurational entropy of a material by introducing different atomic species can tune phase composition and extend the performance optimization space. We enhanced the figure of merit (zT) value to 1.8 at 900 kelvin in an n-type PbSe-based high-entropy material formed by entropy-driven structural stabilization. The largely distorted lattices in this high-entropy system caused unusual shear strains, which provided strong phonon scattering to largely lower lattice thermal conductivity. The thermoelectric conversion efficiency was 12.3% at temperature difference ΔT = 507 kelvin, for the fabricated segmented module based on this n-type high-entropy material. Our demonstration provides a paradigm to improve thermoelectric performance for high-entropy thermoelectric materials through entropy engineering.

 Users may download and print one copy of any publication from the public portal for the purpose of private study or research.  You may not further distribute the material or use it for any profit-making activity or commercial gain  You may freely distribute the URL identifying the publication in the public portal If you believe that this document breaches copyright please contact us providing details, and we will remove access to the work immediately and investigate your claim.

Covalent organic frameworks (COFs) are a promising category of porous materials possessing extensive chemical tunability, high porosity, ordered arrangements at a molecular level, and considerable chemical stability. Despite these advantages, the application of COFs as membrane materials for gas separation is limited by their relatively large pore apertures (typically >0.5 nm), which exceed the sieving requirements for most gases whose kinetic diameters are less than 0.4 nm. Herein, we report the fabrication of ultrathin two-dimensional (2D) membranes through layer-by-layer (LbL) assembly of two kinds of ionic covalent organic nanosheets (iCONs) with different pore sizes and opposite charges. Because of the staggered packing of iCONs with strong electrostatic interactions, the resultant membranes exhibit features of reduced aperture size, optimized stacking pattern, and compact dense structure without sacrificing thickness control, which are suitable for molecular sieving gas separation. One of the hybrid membranes, TpEBr@TpPa-SO3Na with a thickness of 41 nm, shows a H2 permeance of 2566 gas permeation units (GPUs) and a H2/CO2 separation factor of 22.6 at 423 K, surpassing the recent Robeson upper bound along with long-term hydrothermal stability. This strategy provides not only a high-performance H2 separation membrane candidate but also an inspiration for pore engineering of COF or 2D porous polymer membranes.

Designing efficient electrocatalysts for hydrogen evolution reaction is significant for renewable and sustainable energy conversion. Here, we report single-atom platinum decorated nanoporous Co 0 . 85 Se (Pt/np-Co 0 . 85 Se) as efficient electrocatalysts for hydrogen evolution. The achieved Pt/np-Co 0 . 85 Se shows high catalytic performance with a near-zero onset overpotential, a low Tafel slope of 35 mV dec −1 , and a high turnover frequency of 3.93 s −1 at −100 mV in neutral media, outperforming commercial Pt/C catalyst and other reported transition-metal-based compounds. Operando X-ray absorption spectroscopy studies combined with density functional theory calculations indicate that single-atom platinum in Pt/np-Co 0 . 85 Se not only can optimize surface states of Co 0 . 85 Se active centers under realistic working conditions, but also can significantly reduce energy barriers of water dissociation and improve adsorption/desorption behavior of hydrogen, which synergistically promote thermodynamics and kinetics. This work opens up further opportunities for local electronic structures tuning of electrocatalysts to effectively manipulate its catalytic properties by an atomic-level engineering strategy.

Band gap engineering of monolayer transition metal dichalcogenides, such as MoS2 and WS2, is essential for the applications of the two-dimensional (2D) crystals in electronic and optoelectronic devices. Although it is known that chemical mixture can evidently change the band gaps of alloyed Mo1−xWxS2 crystals, the successful growth of Mo1−xWxS2 monolayers with tunable Mo/W ratios has not been realized by conventional chemical vapor deposition. Herein, we developed a low-pressure chemical vapor deposition (LP-CVD) method to grow monolayer Mo1−xWxS2 (x = 0–1) 2D crystals with a wide range of Mo/W ratios. Raman spectroscopy and high-resolution transmission electron microscopy demonstrate the homogeneous mixture of Mo and W in the 2D alloys. Photoluminescence measurements show that the optical band gaps of the monolayer Mo1−xWxS2 crystals strongly depend on the Mo/W ratios and continuously tunable band gap can be achieved by controlling the W or Mo portion by the LP-CVD.