Zn batteries potentially offer the highest energy density among aqueous batteries that are inherently safe, inexpensive, and sustainable. However, most cathode materials in Zn batteries suffer from capacity fading, particularly at a low current rate. Herein, it is shown that the ZnCl 2 "water-in-salt" electrolyte (WiSE) addresses this capacity fading problem to a large extent by facilitating unprecedented performance of a Zn battery cathode of Ca 0.20 V 2 O 5 •0.80H 2 O. Upon increasing the concentration of aqueous ZnCl 2 electrolytes from 1 m to 30 m, the capacity of Ca 0.20 V 2 O 5 •0.80H 2 O rises from 296 mAh g −1 to 496 mAh g −1 ; its absolute working potential increases by 0.4 V, and most importantly, at a low current rate of 50 mA g −1 , that is, C/10; its capacity retention increases from 8.4% to 51.1% over 100 cycles. Ex situ characterization results point to the formation of a new ready-to-dissolve phase on the electrode in the dilute electrolyte. The results demonstrate that the Zn-based WiSE may provide the underpinning platform for the applications of Zn batteries for stationary grid-level storage.

No abstract

No abstract

Semiconductor Quantum dots (QDs) have generated extensive interest for biological and clinical applications. These applications arise from their unique properties, such as high brightness, long-term stability, simultaneous detection of multiple signals, tunable emission spectra. However, high-quality QDs, whether single or core-shell QDs, are most commonly synthesized in organic solution and surface-stabilized with hydrophobic organic ligands and thus lack intrinsic aqueous solubility. For biological applications, very often it is necessary to make the QDs dispersible in water and therefore to modify the QD surfaces with various bifunctional surface ligands or caps to promote solubility in aqueous media. Well-defined methods have been developed for QD surface modification to impart biocompatibility to these systems. In this review, we summarize the recent progress and strategies of QDs surface modification for potential cancer diagnostic and therapeutic applications. In addition, the question that arose from QD surface modification, such as impact of size increase of QD bioconjugates after surface-functionalization or surface modification on photophysical properties of QDs, are also discussed.

Two-dimensional correlation spectroscopy was used to study the composition-dependent spectral variations of the CH-stretching bands of N,N-dimethylformamide (DMF)-water mixtures with X(DMF) ranging from 0.98 to 0.60. By a detailed correlation analysis of the spectral changes of the CH- and OH-stretching bands, it is found that the intensities of the CH and OH bands change in different ways when the water content is increased. It is also found that two different regions of the water content can be distinguished, in which the intensity changes have different signatures. A tentative explanation for how these phenomena might be related to structural changes in the mixture is proposed. The structural change of DMF induced by the water hydrogen bonded on the carbonyl group is supposed to be the possible origin of the methyl C-H blueshift instead of the direct C-H...O interactions before the hydrophobic hydration takes place.