Highly efficient capture and enrichment is always the key for rapid analysis of airborne pathogens. Herein we report a simple microfluidic device which is capable of fast and efficient airborne bacteria capture and enrichment. The device was validated with Escherichia coli (E. coli) and Mycobacterium smegmatis. The results showed that the efficiency can reach close to 100% in 9 min. Compared with the traditional sediment method, there is also great improvement with capture limit. In addition, various flow rate and channel lengths have been investigated to obtain the optimized condition. The high capture and enrichment might be due to the chaotic vortex flow created in the microfluidic channel by the staggered herringbone mixer (SHM) structure, which is also confirmed with flow dynamic mimicking. The device is fabricated from polydimethylsiloxane (PDMS), simple, cheap, and disposable, perfect for field application, especially in developing countries with very limited modern instruments.

No abstract

Circulating tumor cells (CTCs) have been proposed to be an active source of metastasis or recurrence of hepatocellular carcinoma (HCC). The enumeration and characterization of CTCs has important clinical significance in recurrence prediction and treatment monitoring in HCC patients. We previously developed a unique method to separate HCC CTCs based on the interaction of the asialoglycoprotein receptor (ASGPR) expressed on their membranes with its ligand. The current study applied the ligand-receptor binding assay to a CTC-chip in a microfluidic device. Efficient capture of HCC CTCs originates from the small dimensions of microfluidic channels and enhanced local topographic interactions between the microfluidic channel and extracellular extensions. With the optimized conditions, a capture yield reached > 85% for artificial CTC blood samples. Clinical utility of the system was further validated. CTCs were detected in all the examined 36 patients with HCC, with an average of 14 ± 10/2 mL. On the contrary, no CTCs were detected in healthy, benign liver disease or non-HCC cancer subjects. The current study also successfully demonstrated that the captured CTCs on our CTC-chip were readily released with ethylene diamine tetraacetic acid (EDTA); released CTCs remained alive and could be expanded to form a spheroid-like structure in a 3-dimensional cell culture assay; furthermore, sensitivity of released CTCs to chemotherapeutic agents (sorafenib or oxaliplatin) could be effectively tested utilizing this culture assay. In conclusion, the methodologies presented here offer great promise for accurate enumeration and easy release of captured CTCs, and released CTCs could be cultured for further functional studies.

Airborne Mycobacterium tuberculosis is the main source of tuberculosis infection, which is known as one of the worldwide infectious diseases. Direct capture and analysis of airborne Mycobacterium tuberculosis is essential for disease prevention and control. At present, low concentration of pathogens directly collected from the air is the major drawback for rapid analysis. Herein an integrated microfluidic system capable of airborne Mycobacterium tuberculosis capture, enrichment, and rapid bacteriological immunoassay was developed. The whole detection time was decreased to less than 50 min including 20 min of enrichment and 30 min of immunoreaction analysis. It had the advantages of low detection limit, fast detection speed, and low reagent consumption compared with conventional techniques, showing the potential to become a new airborne pathogen analysis platform.

Herein we report fabricating a microfluidic device to monitor harmful algal blooming (HAB). The heterogeneous immuno-enzyme assay was integrated into a self-designed microfluidic chip for rapid and automatic analysis of algal toxins. The device was made from polydimethylsiloxane (PDMS) and was assembled with a home-made control system. The performance of the system was demonstrated by the detection of microcystin, saxitoxin and cylindrospermopsin, the major cyanotoxins. In one single microfluidic chip, multiple samples were controlled and analysed in a parallel manner. Under the optimal conditions, the linear range and the limit of detection of microcystins were 0-5.0 ng mL(-1) and 0.02 ng mL(-1) respectively. The total analysis time was less than 25 min. The designed device was highly automatic, more efficient and economic compared to conventional techniques.