Advanced capabilities in electrical recording are essential for the treatment of heart-rhythm diseases. The most advanced technologies use flexible integrated electronics; however, the penetration of biological fluids into the underlying electronics and any ensuing electrochemical reactions pose significant safety risks. Here, we show that an ultrathin, leakage-free, biocompatible dielectric layer can completely seal an underlying layer of flexible electronics while allowing for electrophysiological measurements through capacitive coupling between tissue and the electronics, and thus without the need for direct metal contact. The resulting current-leakage levels and operational lifetimes are, respectively, four orders of magnitude smaller and between two and three orders of magnitude longer than those of any other flexible-electronics technology. Systematic electrophysiological studies with normal, paced and arrhythmic conditions in Langendorff hearts highlight the capabilities of the capacitive-coupling approach. Our technology provides a realistic pathway towards the broad applicability of biocompatible, flexible electronic implants.

Large-scale, dense arrays of plasmonic nanodisks on low-modulus, high-elongation elastomeric substrates represent a class of tunable optical systems, with reversible ability to shift key optical resonances over a range of nearly 600 nm at near-infrared wavelengths. At the most extreme levels of mechanical deformation (strains >100%), nonlinear buckling processes transform initially planar arrays into three-dimensional configurations, in which the nanodisks rotate out of the plane to form linear arrays with "wavy" geometries. Analytical, finite-element, and finite-difference time-domain models capture not only the physics of these buckling processes, including all of the observed modes, but also the quantitative effects of these deformations on the plasmonic responses. The results have relevance to mechanically tunable optical systems, particularly to soft optical sensors that integrate on or in the human body.

Fluidic soft sensors have been widely used in wearable devices for human motion capturing. However, thus far, the biocompatibility of the conductive liquid, the linearity of the sensing signal, and the hysteresis between the loading and release processes have limited the sensing quality as well as the applications of these sensors. In this paper, silicone based strain and force sensors composed of a novel biocompatible conductive liquid (potassium iodide and glycerol solution) are introduced. The strain sensors exhibit negligible hysteresis up to 5 Hz, with a gauge factor of 2.2 at 1 Hz. The force sensors feature a novel multi-functional layered structure, with micro-cylinder-filled channels to achieve high linearity, low hysteresis (5.3% hysteresis at 1 Hz), and good sensitivity (100% resistance increase at a 5 N load). The sensors’ gauge factors are stable at various temperatures and humidity levels. These bio-compatible, low hysteresis, and high linearity sensors are promising for safe and reliable diagnostic devices, wearable motion capture, and compliant human-computer interfaces.

Flying insects are remarkably agile and robust. As they fly through cluttered natural environments, they can demonstrate aggressive acrobatic maneuvers such as backflip, rapid escape, and in-flight collision recovery. Current state-of-the-art subgram microaerial-vehicles (MAVs) are predominately powered by rigid actuators such as piezoelectric ceramics, but they have low fracture strength (120 MPa) and failure strain (0.3%). Although these existing systems can achieve a high lift-to-weight ratio, they have not demonstrated insect-like maneuvers such as somersault or rapid collision recovery. In this article, we present a 665 mg aerial robot that is powered by novel dielectric elastomer actuators (DEA). The new DEA achieves high power density (1.2 kW/kg) and relatively high transduction efficiency (37%). We further incorporate this soft actuator into an aerial robot to demonstrate novel flight capabilities. This insect-scale aerial robot has a large lift-to-weight ratio (>2.2:1) and it achieves an ascending speed of 70 cm/s. In addition to demonstrating controlled hovering flight, it can recover from an in-flight collision and perform a somersault within 0.16 s. This work demonstrates that soft aerial robots can achieve insect-like flight capabilities absent in rigid-powered MAVs, thus showing the potential of a new class of hybrid soft-rigid robots.

Significance Soft actuators have advantages over traditional rigid robots in various applications due to their robustness, low mechanical stiffness, and low weight. Thus far, conventional rigid valves are the most common approach to control hydraulic soft actuators. Although soft valves have been designed in various forms, they have not achieved the pressure or flow rate conditions as required by many existing hydraulic actuators. In this paper, we introduce an electrically driven soft valve using dynamic dielectric elastomer actuators (DEAs). These soft valves have a fast response time and are able to control fluidic pressure and flow rates that match the needs of hydraulic actuators with mesoscale channels. The DEA valves enable possibilities for soft onboard controls for future fluidic soft robots.