This paper presented a novel droplet-based pressure sensor using elastic and capacitive electrode-electrolyte interfaces to achieve ultrahigh mechanical-to-electrical sensitivity (1.58 μF kPa(-1)) and resolution (1.8 Pa) with a simple device architecture. The miniature transparent droplet sensors, fabricated by one-step laser micromachining, consisted of two flexible polymer membranes with conductive coating and a separation layer hosting a sensing chamber for an electrolyte droplet. The sensing principle primarily relied on high elasticity of the sensing droplet and large capacitance presented at the electrode-electrolyte interface. A simple surface modification scheme was introduced to the conductive coating, which reduced hysteresis of the droplet deformation without substantially compromising the interfacial capacitance. Moreover, the major concern of liquid evaporation was addressed by a mixture of glycerol and electrolyte with long-term stability in a laboratory environment. Theoretical analyses and experimental investigations on several design parameters (i.e., the dimensions of the sensing chamber and the droplet size) were thoroughly conducted to characterize and optimize the overall sensitivity of the device. Moreover, the environmental influences (e.g., temperature and humidity) on the capacitive measurement were further investigated. Finally, the simply constructed and mechanically flexible droplet sensor was successfully applied to detect minute blood pressure variations on the skin surface (with the maximum value less than 100 Pa) throughout cardiovascular cycles.

Droplet-based transport phenomena driven by surface tension have been explored as an automated pumping source for a number of chemical and biological applications. In this paper, we present a comprehensive theoretical and experimental investigation of unconventional droplet-based motions on a superhydrophobic-patterned surface microfluidic (S(2)M) platform. The S(2)M surfaces are monolithically fabricated using a facile two-step laser micromachining technique on regular polydimethylsiloxane (PDMS) chemistry. Unlike the traditional droplet-driven pumps built on an enclosed microfluidic network, the S(2)M network pins the liquid-solid interface of droplets to the lithographically defined wetting boundary and establishes a direct linkage between the volumetric and hydraulic measures. Moreover, diverse modes of droplet motions are theoretically determined and experimentally characterized in a bi-droplet configuration, among which several unconventional droplet-driven transport phenomena are first demonstrated. These include big-to-small droplet merging, droplet balancing, as well as bidirectional transporting, in addition to the classic small-to-big droplet transition. Furthermore, multi-stage programmable bidirectional pumping has been implemented on the S(2)M platform, according to the newly established droplet manipulation principle, to illustrate its potential use for automated biomicrofluidic and point-of-care diagnostic applications.

Textile-enabled interfacial microfluidics, utilizing fibrous hydrophilic yarns (e.g., cotton) to guide biological reagent flows, has been extended to various biochemical analyses recently. The restricted capillary-driving mechanism, however, persists as a major challenge for continuous and facilitated biofluidic transport. In this paper, we have first introduced a novel interfacial microfluidic transport principle to drive three-dimensional liquid flows on a micropatterned superhydrophobic textile (MST) platform in a more autonomous and controllable manner. Specifically, the MST system utilizes the surface tension-induced Laplace pressure to facilitate the liquid motion along the hydrophilic yarn, in addition to the capillarity present in the fibrous structure. The fabrication of MST is simply accomplished by stitching hydrophilic cotton yarn into a superhydrophobic fabric substrate (contact angle 140 ± 3°), from which well-controlled wetting patterns are established for interfacial microfluidic operations. The geometric configurations of the stitched micropatterns, e.g., the lengths and diameters of the yarn and bundled arrangement, can all influence the transport process, which is investigated both experimentally and theoretically. Two operation modes, discrete and continuous transport, are also presented in detail. In addition, the gravitational effect as well as the droplet removal process have been also considered and quantitatively analysed during the transport process. As a demonstration, an MST design has been implemented on an artificial skin surface to collect and remove sweat in a highly efficient and facilitated means. The results have illustrated that the novel interfacial transport on the textile platform can be potentially extended to a variety of biofluidic collection and removal applications.

The emerging technologies on mobile-based diagnosis and bioanalytical detection have enabled powerful laboratory assays such as enzyme-linked immunosorbent assay (ELISA) to be conducted in field-use lab-on-a-chip devices. In this paper, we present a low-cost universal serial bus (USB)-interfaced mobile platform to perform microfluidic ELISA operations in detecting the presence and concentrations of BDE-47 (2,2',4,4'-tetrabromodiphenyl ether), an environmental contaminant found in our food supply with adverse health impact. Our point-of-care diagnostic device utilizes flexible interdigitated carbon black electrodes to convert electric current into a microfluidic pump via gas bubble expansion during electrolytic reaction. The micropump receives power from a mobile phone and transports BDE-47 analytes through the microfluidic device conducting competitive ELISA. Using variable domain of heavy chain antibodies (commonly referred to as single domain antibodies or Nanobodies), the proposed device is sensitive for a BDE-47 concentration range of 10(-3)-10(4 ) μg/l, with a comparable performance to that uses a standard competitive ELISA protocol. It is anticipated that the potential impact in mobile detection of health and environmental contaminants will prove beneficial to our community and low-resource environments.

The latest development in wearable technologies has attracted much attention. In particular, collection and analysis of body fluids has been a focus. In this paper, we have reported a wearable microfluidic platform made using conventional fabric materials and laser micromachining to measure the flow rate on a patterned fabric surface, referred to as digital droplet flowmetry (DDF). The proposed wearable DDF is capable of collecting and measuring continuous perspiration with high precision (96% on average) in a real-time fashion over a defined area of skin. We have introduced a theoretical model for the proposed wearable interfacial microfluidic platform, under which various design parameters have been investigated and optimized for various conditions. The novel digitalized measurement principle of DDF provides fast responses, digital readouts, system flexibility, and continuous performance of the flow measurement. Moreover, the proposed DDF platform can be conveniently implemented on regular apparel or a wearable device, and has potential to be applied to dynamic removal, collection and monitoring of biofluids for various physiological and clinical processes.