Geopolymer concrete (GPC) has been used as a partial replacement of Portland cement concrete (PCC) in various construction applications. In this paper, two artificial intelligence approaches, namely adaptive neuro fuzzy inference (ANFIS) and artificial neural network (ANN), were used to predict the compressive strength of GPC, where coarse and fine waste steel slag were used as aggregates. The prepared mixtures contained fly ash, sodium hydroxide in solid state, sodium silicate solution, coarse and fine steel slag aggregates as well as water, in which four variables (fly ash, sodium hydroxide, sodium silicate solution, and water) were used as input parameters for modeling. A total number of 210 samples were prepared with target-specified compressive strength at standard age of 28 days of 25, 35, and 45 MPa. Such values were obtained and used as targets for the two AI prediction tools. Evaluation of the model’s performance was achieved via criteria such as mean absolute error (MAE), root mean square error (RMSE), and coefficient of determination (R2). The results showed that both ANN and ANFIS models have strong potential for predicting the compressive strength of GPC but ANFIS (MAE = 1.655 MPa, RMSE = 2.265 MPa, and R2 = 0.879) is better than ANN (MAE = 1.989 MPa, RMSE = 2.423 MPa, and R2 = 0.851). Sensitivity analysis was then carried out, and it was found that reducing one input parameter could only make a small change to the prediction performance.

Geopolymer concrete (GPC) is applied successfully in the construction of civil engineering structures. This outcome confirmed that GPC can be used as an alternative material to conventional ordinary Portland cement concrete (OPC). Recent investigations were attempted to incorporate recycled aggregates into GPC to reduce the use of natural materials such as stone and sand. However, traditional methodology used to predict compressive strength and to find out an optimum mix for GPC is yet to be formulated, especially in cases of GPC using by-products as aggregates. In this study, we propose novel hybrid artificial intelligence (AI) approaches, namely a particle swarm optimization (PSO)-based adaptive network-based fuzzy inference system (PSOANFIS) and a genetic algorithm (GA)-based adaptive network-based fuzzy inference system (GAANFIS) to predict the 28-day compressive strength of GPC containing 100% waste slag aggregates. To construct and validate these models, 21 different mixes with 210 specimens were casted and tested. Three input parameters were used to predict the tested compressive strength of GPC, i.e., the sodium solution (NaOH) concentration (varied from 10 to 14 M), the mass ratio of alkaline activation solution to fly ash (AAS/FA), ranging from 0.4 to 0.5, and the mass ratio of sodium silicate (Na2SiO3) to sodium hydroxide solution (SS/SH) which was varied from 2 to 3. The compressive strength of the fabricated GPC was used as output parameter for the prediction models. Validation of the models was done using several statistical criteria such as mean absolute error (MAE), root-mean-square error (RMSE), and correlation coefficient (R). The results show that the PSOANFIS and GAANFIS models have strong potential for predicting the 28-day compressive strength of GPC, but the PSOANFIS (MAE = 1.847 MPa, RMSE = 2.251 MPa, and R = 0.934) was slightly better than the GAANFIS (MAE = 2.115 MPa, RMSE = 2.531 MPa, and R = 0.927). This study will help in reducing the time and cost for the implementation of laboratory experiments in designing the optimum proportions of GPC.

No abstract

No abstract

No abstract