The Earth’s geomagnetic field (GMF) is known to influence magnetoreceptive creatures, from bacteria to mammals as a sensory cue or a physiological modulator, despite it is largely thought that humans cannot sense the GMF. Here, we show that humans sense the GMF to orient their direction toward food in a self-rotatory chair experiment. Starved men, but not women, significantly oriented toward the ambient/modulated magnetic north or east, directions which had been previously food-associated, without any other helpful cues, including sight and sound. The orientation was reproduced under blue light but was abolished under a blindfold or a longer wavelength light (> 500 nm), indicating that blue light is necessary for magnetic orientation. Importantly, inversion of the vertical component of the GMF resulted in orientation toward the magnetic south and blood glucose levels resulting from food appeared to act as a motivator for sensing a magnetic field direction. The results demonstrate that male humans sense GMF in a blue light-dependent manner and suggest that the geomagnetic orientations are mediated by an inclination compass.

In this work, a three-dimensional volume-of-fluid computational fluid dynamics (VOF-CFD) model was developed for a coagulation bath of the dry-jet wet spinning (DJWS) process for the production of polyacrylonitrile (PAN)-based carbon fiber under long-term operating conditions. The PAN-fiber was assumed to be a deformable porous zone with variations in moving speed, porosity, and permeability. The Froude number, interpreted as the wave-making resistance on the liquid surface, was analyzed according to the PAN-fiber wind-up speed ( v P A N ). The effect of the PAN speed on the reflection and wake flow formed by drag between a moving object and fluid is presented. A method for tracking the wave amplitude with time is proposed based on the iso-surface of the liquid volume fraction of 0.95. The wave signal for 30 min was divided into the initial and resonance states that were distinguished at 8 min. The maximum wave amplitude was less than 0.5 mm around the PAN-fiber inlet nozzle for v P A N = 0.1–0.5 m/s in the resonance state. The VOF-CFD model is useful in determining the maximum v P A N under an allowable air gap of the DJWS process.