No abstract

We analyze the performance of wireless data telemetry links for implanted biomedical systems. An experimental realization of a bidirectional half-duplex link that uses near-field inductive coupling between the implanted system and an external transceiver is described. Our system minimizes power consumption in the implanted system by using impedance modulation to transmit high-bandwidth information in the uplink direction, i.e., from the implanted to the external system. We measured a data rate of 2.8 Mbps at a bit error rate (BER) of <10(-6) (we could not measure error rates below 10(-6) ) and a data rate of 4.0 Mbps at a BER of 10(-3). Experimental results also demonstrate data transfer rates up to 300 kbps in the opposite, i.e., downlink direction. We also perform a theoretical analysis of the bit error rate performance. An important effect regarding the asymmetry of rising and falling edges that is inherent to impedance modulation is predicted by theory and confirmed by experiment. The link dissipates 2.5 mW in the external system and only 100 muW in the implanted system, making it among the most power-efficient inductive data links reported. Our link is compatible with FCC regulations on radiated emissions.

Fast wideband spectrum analysis is expensive in power and hardware resources. We show that the spectrum-analysis architecture used by the biological cochlea is extremely efficient: analysis time, power and hardware usage all scale linearly with , the number of output frequency bins, versus log() for the Fast Fourier Transform. We also demonstrate two on-chip radio frequency (RF) spectrum analyzers inspired by the cochlea. They use exponentially-tapered transmission lines or filter cascades to model cochlear operation: Inductors map to fluid mass, capacitors to membrane stiffness and active elements (transistors) to active outer hair cell feedback mechanisms. Our RF cochlea chips, implemented in a 0.13 m CMOS process, are 3 mm 1.5 mm in size, have 50 exponentially-spaced output channels, have 70 dB of dynamic range, consume 300 mW of power and analyze the radio spectrum from 600 MHz to 8 GHz. Our work, which delivers insight into the efficiency of analog computation in the ear, may be useful in the front ends of ultra-wideband radio systems for fast, power-efficient spectral decomposition and analysis. Our novel rational cochlear transfer functions with zeros also enable improved audio silicon cochlea designs with sharper rolloff slopes and lower group delay than prior all-pole versions.

Abstract-This paper presents work on ultra-low-power circuits for brain-machine interfaces with applications for paralysis prosthetics, stroke, Parkinson's disease, epilepsy, prosthetics for the blind, and experimental neuroscience systems. The circuits include a micropower neural amplifier with adaptive power biasing for use in multi-electrode arrays; an analog linear decoding and learning architecture for data compression; low-power radio-frequency (RF) impedance-modulation circuits for data telemetry that minimize power consumption of implanted systems in the body; a wireless link for efficient power transfer; mixed-signal system integration for efficiency, robustness, and programmability; and circuits for wireless stimulation of neurons with power-conserving sleep modes and awake modes. Experimental results from chips that have stimulated and recorded from neurons in the zebra finch brain and results from RF power-link, RF data-link, electrode-recording and electrode-stimulating systems are presented. Simulations of analog learning circuits that have successfully decoded prerecorded neural signals from a monkey brain are also presented.