The photocatalytic oxidation of cyanide by titanium dioxide (TiO2) supported on activated carbon (AC) was evaluated in a continuous flow UV photo-reactor. The continuous photo-reactor was made of glass and covered with a wood box to isolate the fluid of external conditions. The TiO2-AC synthesized by the impregnation of TiO2 on granular AC composites was characterized by inductively coupled plasma optical emission spectrometry (ICP-OES), Scanning Electron Microscopy (SEM), and nitrogen adsorption-desorption isotherms. Photocatalytic and adsorption tests were conducted separately and simultaneously. The results showed that 97% of CN− was degraded within 24 h due to combined photocatalytic oxidation and adsorption. To estimate the contribution of only adsorption, two-stage tests were performed. First, 74% cyanide ion degradation was reached in 24 h under dark conditions. This result was attributed to CN− adsorption and oxidation due to the generation of H2O2 on the surface of AC. Then, 99% degradation of cyanide ion was obtained through photocatalysis during 24 h. These results showed that photocatalysis and the continuous photo-reactor’s design enhanced the photocatalytic cyanide oxidation performance compared to an agitated batch system. Therefore, the use of TiO2-AC composites in a continuous flow photo-reactor is a promising process for the photocatalytic degradation of cyanide in aqueous solutions.

The incorporation of titanium dioxide and copper onto activated carbon for phenol removal was evaluated. Based on catalyst contents and phenol degradation, four composites were selected and characterized. The results showed that both adsorption and photocatalytic activities were influenced by the presence and arrangement of the catalysts.