Here we report the use of fluorescence microscopy and closed bipolar electrodes to reveal electrochemical and electrocatalytic activity on large electrochemical arrays. We demonstrate fluorescence-enabled electrochemical microscopy (FEEM) as a new electrochemical approach for imaging transient and heterogeneous electrochemical processes. This method uses a bipolar electrode mechanism to directly couple a conventional oxidation reaction, e.g., the oxidation of ferrocene, to a special fluorogenic reduction reaction. The generation of the fluorescent product on the cathodic pole enables one to directly monitor an electrochemical process with optical microscopy. We demonstrate the use of this method on a large electrochemical array containing thousands or more parallel bipolar microelectrodes to enable spatially and temporally resolved electrochemical imaging. We first image molecular transport of a redox analyte in solution using an array containing roughly 1000 carbon fiber ultramicroelectrodes. We then carry out a simple electrocatalysis experiment to show how FEEM can be used for electrocatalyst screening. This new method could prove useful for imaging transient electrochemical events, such as fast exocytosis events on single and networks of neurons, and for parallel, high-throughput screening of new electrocatalysts.

Here we report the use of fast-scan cyclic voltammetry (FSCV) to study transient collision and immobilization events of single electrocatalytic metal nanoparticles (NPs) on an inert electrode. In this study, a fast, repetitive voltage signal is continuously scanned on an ultramicroelectrode and its faradaic signal is recorded. Electrocatalytically active metal NPs are allowed to collide and immobilize on the electrode resulting in the direct recording of the transient voltammetric response of single NPs. This approach enables one to obtain the transient voltammetric response and electrocatalytic effects of single catalytic NPs as they interact with an inert electrode. The use of FSCV has enabled us to obtain chemical information, which is otherwise difficult to study with previous amperometric methods.

A novel NaSn intermetallic improves critical electrochemical interfaces between molten sodium and NaSICON ceramic electrolyte at low temperatures (110 °C).

We investigate the principle of the open circuit potential (OCP) change upon a particle collision event based on mixed potential theory and confirmed by a mimic experiment in which we studied the changes in the OCP when two different electrodes (Pt and Au) are brought into contact in a solution that contains some irreversible redox couples. A micrometer-sized Au ultramicroelectrode, when connected in parallel to a Pt micro- or nanoelectrode, showed clearly measurable OCP changes whose magnitude matches well with that predicted by a simplified mixed potential theory for a pair of different electrode materials. On the basis of the study, each electrode establishes a different mixed potential involving two or more half reactions that have different heterogeneous electron transfer kinetics at different electrodes and the OCP changes are very sensitive to the relative ratio of the rate constant of the individual half reaction at different materials.

In this technical note, we report a process in scaling down the fabrication of Au disk nanoelectrodes as small as approximately 4 nm in radii. We have developed a bottom-up approach toward the fabrication of individual disk-shape Au nanoelectrodes. This new approach is based upon electrochemical deposition of Au in a silica nanopore electrode and involves the following four steps. First, a laser-assisted pulling process is employed to fabricate a disk-shape Pt nanoelectrode. Second, a Pt nanopore electrode is obtained by electrochemically etching the Pt from the disk nanoelectrode. Third, a Au metal nanowire is electrochemically deposited using the Pt nanopore electrode as a template. In the last step, the Au electrode is slightly polished to expose a disk-shape Au nanoelectrode, whose size is determined by the size of the initial Pt nanoelectrode. Steady-state voltammetry in the presence of ferrocene has been used to characterize these Au nanoelectrodes. The Au nanoelectrodes are also characterized using cyclic voltammetry in a H2SO4 solution. The results show characteristic peaks corresponding to the formation of Au surface oxides and their subsequent reduction. The Au nanoelectrodes are modified with 6-(ferrocenyl)hexanethiol molecules, and cyclic voltammetry is used to characterize the ferrocene molecules attached at the Au. As an application, we have constructed Au single-nanoparticle electrodes (SNPEs) using the Au disk nanoelectrodes fabricated by electrochemical deposition. Our initial results of such SNPEs show excellent electrochemical response from single Au nanoparticles.