Articles you may be interested inEffect of BCl3 in chlorine-based plasma on etching 4H-SiC for photoconductive semiconductor switch applications J.In this study, SiC was etched in a NF 3 /CH 4 inductively coupled plasma. Process parameters and experimental ranges are radio frequency ͑rf͒ source power 700-900 W, bias power 50-150 W, pressure 6 -12 mTorr, and NF 3 percentage 20%-100%. The etch rate and profile angle were examined as a function of process parameters. For optimization, effects of various parameter combinations were investigated by means of a 2 4 full factorial experiment. Main effect analysis revealed that the etch rate is the most significantly affected by NF 3 percentage. In contrast, the source power effect was the most insignificant for both etch rate and profile. For the dc bias less than about 385 V, the etch rate was strongly correlated to the dc bias induced by the source power. This correlation was observed for variations in other parameters. This reveals that the dc bias played an important role in determining the etch rate. For variations in NF 3 percentage, both etch rate and profile angle behaved in a conflicting way. The highest etch rate optimized by the experimental design is 450 nm/min, obtained at 700 W source power, 150 W bias power, 12 mTorr, and 100% NF 3 percentage.

No abstract