Petroleum based epoxy resins exhibit various excellent properties such as adhesion, mechanical performance, electrical insulation and chemical resistance. There is wide concern towards depletion of non-renewable resources, climate change and finding renewable alternatives for petroleum based materials to reduce the emission of greenhouse gases. This review mainly draws attention towards the utilization of renewable resource based epoxy resin derived from lignocellulosic biomass, furan, tannins, itaconic acid, rosin acid and bio-oil etc. Without altering the mechanical and thermal properties much, epoxy resins derived from renewable materials have been widely investigated. The last two decades have witnessed an exponential growth in using bio-derived products, which has been driven by the need to replace petroleum based materials, reduce fuel consumption and lower the overall environmental impact.

No abstract

The petroleum based diglycidyl ether of bisphenol A (DGEBA) epoxy resin is one of the most extensively used epoxy resins for various industrial applications such as paints, coatings, adhesives, and structural applications, owing to its excellent mechanical and thermal properties, low curing shrinkage, and good chemical resistance. However, the serious drawbacks in terms of brittleness or poor fracture energy significantly restricted its extensive utilization. Various renewable resources based flexible chains were used to blend with DGEBA for toughening and to significantly improve the fracture properties without sacrificing the mechanical properties. This review mainly focuses on toughening of DGEBA with various renewable polymers and the effect of its concentration on its toughening mechanism.

Itaconic acid, a carbohydrate‐derived aliphatic dicarboxylic acid, is a potential chemical for the synthesis of renewable resource‐based resins and polyesters. Owing to environmental reasons, there is a gradual demand for renewable resources in the chemical industry. Conversely, as a rather underappreciated side effect of this growth, novel chemical building blocks are obtained, which are not commercially derived from petrochemical sources. In this respect, itaconic acid has attracted much attention and its trifunctional structure leads to the synthesis of novel polymeric materials. This review discusses the most relevant information for bio‐based resins and polyesters resulting from itaconic acid and distinctive properties for various commercial applications. © 2017 Society of Chemical Industry

No abstract