Cube Satellite (CubeSat) technology is an attractive emerging alternative to conventional satellites in radio astronomy, earth observation, weather forecasting, space research, and communications. Its size, however, poses a more challenging restriction on the circuitry and components as they are expected to be closely spaced and very power efficient. One of the main components that will require careful design for CubeSats is their antennas, as they are needed to be lightweight, small in size, and compact or deployable for larger antennas. This paper presents a review of antennas suitable for picosatellite applications. An overview of the applications of picosatellites will first be explained, prior to a discussion on their antenna requirements. Material and antenna topologies which have been used will be subsequently discussed prior to the presentation of several deployable configurations. Finally, a perspective and future research work on CubeSat antennas will be discussed in the conclusion.

No abstract

An ultra‐wideband magnetic near‐field probe based on a conventional low‐cost four layers of FR‐4 printed circuit board is proposed in this article. It can be used to measure the magnetic near‐field strength from RF magnetic sources or electronic devices for EMI conformance test. The operating frequency of the probe is from 1 GHz up to 20 GHz. The probe is constructed based on a coplanar waveguide and stripline with a short‐end loop. The probe dimension is 10 mm × 25 mm × 0.6 mm. The prototype probe is electric field‐shield structure and has a very high unwanted electric field suppression ratio about 17.7 dB. The probe calibration factor from the simulation agrees well with the calibration factor computed from the measurement. The average probe factor is 38.8 dBS/m and probe sensitivity is 47.4 dB μA/m.

No abstract

No abstract