This paper presents the first report on Gd doping (0%–4%) of GaN thin films by metal organic chemical vapor deposition. The Ga1−xGdxN films grown in this study were found to be of good crystalline quality, single-phase, and unstrained, with a high saturation magnetization strength of 20 emu/cm3 being obtained for GaN films doped with 2% Gd at room temperature. Furthermore, these films were found to be conductive with an enhanced n-type behavior suggesting that unintentional donors are responsible for stabilizing the ferromagnetic phase in as-grown Ga1−xGdxN. Additionally, it was found that this magnetization can be enhanced by n-(Si: 1018 cm−3) and p-(Mg: 1019 cm−3) doping to 110 emu/cm3 and ∼500 emu/cm3, respectively. This paper shows empirically that holes are more efficient in stabilizing the ferromagnetic phase as compared to electrons. Overall, this research has resulted in a room temperature ferromagnetic dilute magnetic semiconductor that is conductive and whose magnetic properties can be tuned by carrier doping thus providing a path towards realizing spintronic devices.

Windows are based on varying R-R intervals. It has been tested on ECG simulator data and also on different records of the MIT-BIH arrhythmia database, producing satisfactory results. ECG timing intervals are also required for monitoring the cardiac condition of patients. Hence after feature detections ECG timing intervals like the PR interval, QRS duration, the QT interval, the QT corrected interval and Vent Rate are efficiently calculated using proposed Formulae.

No abstract

Microwave resonators are widely used for numerous applications including communication, biomedical and chemical applications, material testing, and food grading. Split-ring resonators in both planar and nonplanar forms are a simple structure which has been in use for several decades. This type of resonator is characterized with low cost, ease of fabrication, moderate quality factor, low external noise interference, high stability, and so forth. Due to these attractive features and ease in handling, nonplanar form of structure has been utilized for material characterization in 1-5 GHz range. Resonant frequency and quality factor are two important parameters for determination of material properties utilizing perturbation theory. Shield made of conducting material is utilized to enclose split-ring resonator which enhances quality factor. This work presents a novel technique to develop shield around a predesigned nonplanar split-ring resonator to yield optimized quality factor. Based on this technique and statistical analysis regression equations have also been formulated for resonant frequency and quality factor which is a major outcome of this work. These equations quantify dependence of output parameters on various factors of shield made of different materials. Such analysis is instrumental in development of devices/designs where improved/optimum result is required.

An electrocardiogram (ECG) signal may be affected by different types of disturbances/noises e.g. Power Line Interference (PLI), baseline wander, motion artifacts etc. Removing such disturbing signals from an ECG signal is the key to its accurate analysis leading to diagnosis of potential disease(s). In this paper, we present State Space Recursive Least Squares (SSRLS) filter based method for removal of 50Hz PLI noise from an ECG signal. The results are encouraging when compared with notch filter of varying attenuation levels. Under varying PLI noise levels, the SSRLS filter is seen to show superior performance as compared to notch filter. This work is part of National Information & Communication Technologies Research and Development (ICT R&D) fund project done in collaboration with National Institute of Heart Diseases (NIHD), Pakistan.