▪ Abstract  Yttrium aluminum garnet (YAG) (Y3Al5O12) single crystals doped with active species such as Nd and Yb have been used as laser media in solid-state lasers requiring high energy and excellent beam quality. This is because single crystals have extremely high thermal mechanical properties and optical qualities and because they enable high-efficiency laser oscillation. In 1995 the authors, using polycrystalline Nd:YAG, demonstrated a high-efficiency laser that was comparable to a single-crystal laser. Subsequently, single-longitudinal-mode oscillation, green and blue laser oscillation, and ultrashort-pulse laser oscillation were reported. Using the ceramic powder approach, the authors developed a composite laser element with a complicated structure that could not be produced by crystal growth techniques. This review discusses problems of conventional single-crystal growth, the fabrication and characteristics of ceramic lasers, laser oscillation properties (continuous-wave and pulse operation), light-scattering sources in ceramics, and typical applications of ceramic lasers.

We produce carrier-envelope-phase-stable 15.7-fs (2-cycle) 740-microJ pulses at the 2.1-microm carrier wavelength, from a three-stage optical parametric chirped-pulse amplifier system, pumped by an optically synchronized 49-ps 11-mJ Nd:YLF laser. A novel seed pulse spectral shaping method is used to ascertain the true amplified seed energy and the parametric superfluorescence levels.

We produce 1.5 cycle (10.5 fs), 1.2 mJ, 3 kHz carrier-envelope-phase-stable pulses at 2.1 μm carrier wavelength, from a three-stage optical parametric chirped-pulse amplifier system, pumped by an optically synchronized 1.6 ps Yb:YAG thin disk laser. A chirped periodically poled lithium niobate crystal is used to generate the ultrabroad spectrum needed for a 1.5 cycle pulse through difference frequency mixing of spectrally broadened pulse from a Ti:sapphire amplifier. It will be an ideal tool for producing isolated attosecond pulses with high photon energies.

The hottest frequency region in terms of research currently lies in the ‘frequency gap' region between microwaves and infrared: terahertz waves. Although new methods for generating terahertz radiation have been developed, most sources cannot generate high-brightness terahertz beams. Here we demonstrate the generation of ultrabright terahertz waves (brightness ~0.2 GW/sr·cm2, brightness temperature of ~1018 K, peak power of >50 kW) using parametric wavelength conversion in a nonlinear crystal; this is brighter than many specialized sources such as far-infrared free-electron lasers (~1016 K, ~2 kW). We revealed novel parametric wavelength conversion using stimulated Raman scattering in LiNbO3 without stimulated Brillouin scattering using recently-developed microchip laser. Furthermore, nonlinear up-conversion techniques allow the intense terahertz waves to be visualized and their frequency determined. These results are very promising for extending applied research into the terahertz region, and we expect that this source will open up new research fields such as nonlinear optics in the terahertz region.