Conductive polymer hydrogels are receiving considerable attention in applications such as soft robots and human-machine interfaces. Herein, a transparent and highly ionically conductive hydrogel that integrates sensing, UV-filtering, water-retaining, and anti-freezing performances is achieved by the organic combination of tannic acid-coated hydroxyapatite nanowires (TA@HAP NWs), polyvinyl alcohol (PVA) chains, ethylene glycol (EG), and metal ions. The highly ionic conductivity of the hydrogel enables tensile strain, pressure, and temperature sensing capabilities. In particular, in terms of the hydrogel strain sensors based on ionic conduction, it has high sensitivity (GF = 2.84) within a wide strain range (350%), high linearity (R 2 = 0.99003), fast response (≈50 ms) and excellent cycle stability. In addition, the incorporated TA@HAP NWs act as a nano-reinforced filler to improve the mechanical properties and confer a UV-shielding ability upon the hydrogel due to its size effect and the characteristics of absorbing ultraviolet light waves, which can reflect and absorb short ultraviolet rays and transmit visible light. Meanwhile, owing to the water-locking effect between EG and water molecules, the hydrogel exhibits freezing resistance at low temperatures and moisture retention at high temperatures. This biocompatible and multifunctional conductive hydrogel provides new ideas for the design of novel ionic skin devices.

The following facile approach has been developed to prepare a biomimetic-structural superhydrophobic surface with high stabilities and strong resistances on 2024 Al alloy that are robust to harsh environments. First, a simple hydrothermal treatment in a La(NO3)3 aqueous solution was used to fabricate ginkgo-leaf like nanostructures, resulting in a superhydrophilic surface on 2024 Al. Then a low-surface-energy compound, dodecafluoroheptyl-propyl-trimethoxylsilane (Actyflon-G502), was used to modify the superhydrophilic 2024 Al, changing the surface character from superhydrophilicity to superhydrophobicity. The water contact angle (WCA) of such a superhydrophobic surface reaches up to 160°, demonstrating excellent superhydrophobicity. Moreover, the as-prepared superhydrophobic surface shows high stabilities in air-storage, chemical and thermal environments, and has strong resistances to UV irradiation, corrosion, and abrasion. The WCAs of such a surface almost remain unchanged (160°) after storage in air for 80 days, exposure in 250 °C atmosphere for 24 h, and being exposed under UV irradiation for 24 h, are more than 144° whether in acidic or alkali medium, and are more than 150° after 48 h corrosion and after abrasion under 0.98 kPa for 1000 mm length. The remarkable durability of the as-prepared superhydrophobic surface can be attributed to its stable structure and composition, which are due to the existence of lanthanum (hydr)oxides in surface layer. The robustness of the as-prepared superhydrophobic surface to harsh environments will open their much wider applications. The fabricating approach for such robust superhydrophobic surface can be easily extended to other metals and alloys.

No abstract

No abstract

The tensile deformation and failure of polymer bonded explosives (PBXs), a particulate composite, is studied in this paper. Two HMX-based PBXs with different binder were selected for study. A diametric compression test, in which a disc-shaped specimen is loaded diametrically, was chosen to generate tensile failure in the materials. The quasi-static tensile properties and the tensile creep properties were studied by using conventional displacement transducers to measure the lateral strain along the horizontal diameter. The whole-field in-plane creep deformation was measured by using the technique of high resolution moiré interferometry. Real time microscopic examination was conducted to monitor the process of deformation and failure of PBXs by using a scanning electron microscope equipped with a loading stage. A manifold method (MM) was used to simulate the deformation and failure of PBX samples under the diametric compression test, including the crack initiation, crack propagation and final cleavage fracture. The mechanisms of deformation and failure of PBXs under diametric compression were analyzed. The diametric compression test and the techniques developed in this research have proven to be applicable to the study of tensile properties of PBXs. q