The helicity injected torus-steady inductive (HIT-SI) experiment uses steady inductive helicity injection to form a spheromak equilibrium and sustain the structure against resistive decay. Helicity injection is performed using two half-tori “injectors” connected to the main plasma volume, whose fields are oscillated in an AC manner. The properties of the sustained spheromak equilibrium have been experimentally observed to vary with the frequency of the injector oscillation, producing higher current gains and more-symmetric and outwardly shifted current centroids with higher frequency. A computational scan of injector frequency using the 3D MHD code PSI-Tet, which models the entire HIT-SI plasma volume including the injectors, has been performed, including a comparison of the results using the full Hall MHD model to those obtained using a simplified “zero-beta” (constant temperature and density) model. The results of both PSI-Tet models are also compared with experimental data and with simulations using the NIMROD code, which does not model the injector regions. The results of the PSI-Tet simulations show that the average temperature and current gain increase with injector frequency, in agreement with experimental trends. The simulations also show qualitative changes in the dynamics of several quantities with increasing injector frequency, such as density oscillations and current evolution. However, the outward shift and symmetrizing of the current centroid, observed experimentally, are not observed in these MHD simulations, indicating that unresolved or excluded dynamics may be important.

A two-temperature Hall-magnetohydrodynamic (Hall-MHD) model, which evolves the electron and ion temperatures separately, is implemented in the PSI-Tet 3D MHD code and used to model plasma dynamics in the Helicity Injected Torus–Steady Inductive (HIT-SI) experiment. The two-temperature model is utilized for HIT-SI simulations in both the PSI-Tet and NIMROD codes at a number of different injector frequencies in the 14.5–68.5 kHz range. At all frequencies, the NIMROD two-temperature model results in increased toroidal current, lower chord-averaged density, higher average temperatures, outward radial shift of the current centroid, and axial symmetrization of the current centroid, relative to the single-temperature NIMROD simulations. The two-temperature PSI-Tet model illustrates similar trends, but at high frequency operation, it exhibits lower electron temperature, smaller toroidal current, and decreased axial symmetrization with respect to the single-temperature PSI-Tet model. With all models, average temperatures and toroidal currents increase with the injector frequency. Power balance and heat fluxes to the wall are calculated for the two-temperature PSI-Tet model and illustrate considerable viscous and compressive heating, particularly at high injector frequency. Parameter scans are also presented for artificial diffusivity, wall temperature, and density. Both artificial diffusivity and the density boundary condition significantly modify the plasma density profiles, leading to larger average temperatures, toroidal current, and relative density fluctuations at low densities. A low density simulation achieves sufficiently high current gain (G > 5) to generate significant volumes of closed flux lasting 1–2 injector periods.

The heliosphere appears to be powered by coaxial helicity injection from a negative helicity injector in the northern hemisphere and a positive one in the southern hemisphere. The injector magnetic flux for both is the measured solar polar magnetic flux, and the injector voltage is generated by a simple dynamo effect due to the differential rotation of the solar surface with the polar magnetic flux. The dynamo current is estimated from the solar motion that it causes. This current also appears to sustain a thin, shallow global magnetic structure over most of the solar surface that has the form of a 1D minimum energy state. The current channel appears to be destroyed and reformed every 11 years. The currents and magnetic fields reverse in this solar cycle. A brief discussion of surface phenomena observed during this cycle is given. Plasma self-organization is briefly discussed and used in this analysis of solar data. The magnetic phenomena discussed include torsional oscillations, the heat source for the chromosphere and the corona, filaments, meridional flow, the solar cycle, sunspots, CMEs, and flares.

A new tool for the exploration and diagnosis of the internal magnetic field of plasmas in the DIII-D tokamak in the form of a constraint on the EFIT (Equilibrium Fitting) Grad–Shafranov code based on the Faraday-effect Radial Interferometer-Polarimeter (RIP) diagnostic is presented, including description, verification, and sample application. The physics underlying the diagnostic and its implementation into EFIT are discussed, and the results showing the verification of the model are given, and the model’s limitations are discussed. The influence of the diagnostic’s input on the resulting equilibrium parameters is characterized. The effect of electron density profile refinement is evaluated and found to be negligible. A sample application of the diagnostic is shown, indicating that the RIP constraint has similar effects on the equilibrium as motional Stark effect constraints do.