Binary Cu/ZnO catalysts with varying molar ratios (90/10 through10/90) were studied under methanol synthesis conditions at 493 K and at atmo spheric pressure. The methanol synthesis activity of the catalysts was correlated to their specific Cu surface area (N 2 O reactive frontal chromatography, N 2 O RFC) after reduction in 2 vol-% H 2 at 513 K. Activity data were supplemented with a detailed analysis of the microstructure i. e. crystallite size and strain of the reduced Cu and the ZnO phases after reduction using X-ray diffraction line profile analysis. The estimated copper surface area based on a spherical shape of the copper crystallites is in good agreement with data determined by N 2 O RFC. A positive correlation of the turnover frequency for methanol production with the observed microstrain of copper in the Cu/ZnO system was found. The results indicate a mutual structural interaction of both components (copper and zinc oxide) in the sense that strained copper particles are stabilized by the unstrained state of the zinc oxide microcrystallites. The observed structural deformation of ZnO in samples with higher Cu loading can originate, for instance, from epitaxial bonding of the oxide lattice to the copper metal, insufficient reduction or residual carbonate due to incomplete thermal decomposition during reduction. Additional EXAFS measurements at the Cu K and the Zn Kedge show that about 5 % ZnO are dissolved in the CuO matrix of the calcined precursors. Furthermore, it is shown that the microstructural changes (e. g. size and strain) of copper can be traced back to the phase composition of the corresponding hydroxycarbonate precursors.

No abstract

No abstract

No abstract

No abstract