A thermally stable perovskite solar cell (PSC) based on a new molecular hole transporter (MHT) of 1,3‐bis(5‐(4‐(bis(4‐methoxyphenyl) amino)phenyl)thieno[3,2‐b]thiophen‐2‐yl)‐5‐octyl‐4H‐thieno[3,4‐c]pyrrole‐4,6(5H)‐dione (coded HL38) is reported. Hole mobility of 1.36 × 10−3 cm2 V−1 s−1 and glass transition temperature of 92.2 °C are determined for the HL38 doped with lithium bis(trifluoromethanesulfonyl)imide and 4‐tert‐butylpyridine as additives. Interface engineering with 2‐(2‐aminoethyl)thiophene hydroiodide (2‐TEAI) between the perovskite and the HL38 improves the power conversion efficiency (PCE) from 19.60% (untreated) to 21.98%, and this champion PCE is even higher than that of the additive‐containing 2,2′,7,7′‐tetrakis(N,N‐di‐p‐methoxyphenylamine)‐9,9′‐spirobifluorene (spiro‐MeOTAD)‐based device (21.15%). Thermal stability testing at 85 °C for over 1000 h shows that the HL38‐based PSC retains 85.9% of the initial PCE, while the spiro‐MeOTAD‐based PSC degrades unrecoverably from 21.1% to 5.8%. Time‐of‐flight secondary‐ion mass spectrometry studies combined with Fourier transform infrared spectroscopy reveal that HL38 shows lower lithium ion diffusivity than spiro‐MeOTAD due to a strong complexation of the Li+ with HL38, which is responsible for the higher degree of thermal stability. This work delivers an important message that capturing mobile Li+ in a hole‐transporting layer is critical in designing novel MHTs for improving the thermal stability of PSCs. In addition, it also highlights the impact of interface design on non‐conventional MHTs.

Although high-efficiency perovskite solar cells (PSCs) have been achieved using a hole-extracting material, spiro-MeOTAD, thermal stability has been unattainable due to the low glass transition temperature of spiro-MeOTAD and additives therein. Here, we report on the use of nanographene-based hole-transporting materials coupled with a pyrene derivative as an interface modifier for thermally stable and high efficiency PSCs. Asymmetric methyl and methoxy groups are introduced in the diphenyl­amino group that is attached to the hexa-peri-hexabenzo­coronene (HBC) nanographene core, coded HBC-DPAMeOMe. 1-Pyrene­methyl­ammonium iodide is coupled to enhance the chemical interaction between perovskite and HBC-DPAMeOMe, which leads to a power conversion efficiency over 23%. A thermal stability test at 85 °C for 1000 h reveals that 83.6% of the initial efficiency (23.04% → 19.25%) is maintained for the device with HBC-DPAMeOMe, while a significant degradation from 20.69% to 5.08% is observed for the device with spiro-MeOTAD. Nanographene-based hole conductors shed light on the thermal stability issue in PSCs.

No abstract