Amorphous carbon nanotubes (ACNTs) with diameters in the range of 7–50 nm were used as absorber materials for electromagnetic waves. The electromagnetic wave absorbing composite films were prepared by a dip-coating method using a uniform mixture of rare earth lanthanum nitrate doped ACNTs and polyvinyl chloride (PVC). The microstructures of ACNTs and ACNT/PVC composites were characterized using transmission electron microscope and X-ray diffraction, and their electromagnetic wave absorbing properties were measured using a vector-network analyzer. The experimental results indicated that the electromagnetic wave absorbing properties of ACNTs are superior to multi-walled CNTs, and greatly improved by doping 6 wt% lanthanum nitrate. The reflection loss (R) value of a lanthanum nitrate doped ACNT/PVC composite was −25.02 dB at 14.44 GHz, and the frequency bandwidth corresponding to the reflector loss at −10 dB was up to 5.8 GHz within the frequency range of 2–18 GHz.

No abstract

Silicon has been considered as one of the most promising anode material alternates for next-generation lithium-ion batteries, because of its high theoretical capacity, environmental friendliness, high safety, low cost, etc. Nevertheless, silicon-based anode materials (especially bulk silicon) suffer from severe capacity fading resulting from their low intrinsic electrical conductivity and great volume variation during lithiation/delithiation processes. To address this challenge, a few special constructions from nanostructures to anchored, flexible, sandwich, core-shell, porous and even integrated structures, have been well designed and fabricated to effectively improve the cycling performance of silicon-based anodes. In view of the fast development of silicon-based anode materials, we summarize their recent progress in structural design principles, preparation methods, morphological characteristics and electrochemical performance by highlighting the material structure. We also point out the associated problems and challenges faced by these anodes and introduce some feasible strategies to further boost their electrochemical performance. Furthermore, we give a few suggestions relating to the developing trends to better mature their practical applications in next-generation lithium-ion batteries.

With developments of the electronics industry, more components are being included in electronic devices, which has led to challenges in thermal management. Using reduced graphene oxide embedded with MQ silicone resin (RGO/MQ) nano-aggregates as the composite filler and silicone rubber (SR) as the matrix, a simple approach is designed to prepare RGO/MQ/SR composites. Reduced graphene oxide (RGO) was first used as a substrate for the growth of MQ silicone resin by hybridization, forming sandwich-like micro structured RGO/MQ nano-aggregates successfully. Then, RGO/MQ was integrated into α,ω-dihydroxylpolydimethylsiloxane based on the in situ solvent-free blending method, followed by condensation and vulcanization, fabricating the final RGO/MQ/SR composites. The effective strategy could enhance the adaptability between graphene and silicone matrix under external stimuli at room temperature by embedding nanoscale MQ into the interface of graphene/silicone as the buffer layer. Obvious improvements were found in both thermal conductivity and mechanical properties due to excellent dispersion and interfacial compatibility of RGO/MQ in the host materials. These attractive results suggest that this RGO/MQ/SR composite has potential as a thermal interface material for heat dissipation applications.

No abstract