The development of bifunctional water‐splitting electrocatalysts that are efficient and stable over a wide range of pH is of great significance but challenging. Here, an atomically dispersed Ru/Co dual‐sites catalyst is reported anchored on N‐doped carbon (Ru/Co–N–C) for outstanding oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) in both acidic and alkaline electrolytes. The Ru/Co–N–C catalyst requires the overpotential of only 13 and 23 mV for HER, 232 and 247 mV for OER to deliver a current density of 10 mA cmgeo−2 in 0.5 m H2SO4 and 1 m KOH, respectively, outperforming benchmark catalysts Pt/C and RuO2. Theoretical calculations reveal that the introduction of Co–N4 sites into Ru/Co–N–C efficiently modify the electronic structure of Ru by enlarging Ru–O covalency and increasing Ru electron density, which in turn optimize the bonding strength between oxygen/hydrogen intermediate species with Ru sites, thereby enhancing OER and HER performance. Furthermore, the incorporation of Co–N4 sites induces electron redistribution around Ru–N4, thus enhancing corrosion–resistance of Ru/Co–N–C during acid and alkaline electrolysis. The Ru/Co–N–C has been applied in a proton exchange membrane water electrolyzer and steady operation is demonstrated at a high current density of 450 mA cmgeo−2 for 330 h.

Nickel-based electrocatalysts are promising candidates for oxygen evolution reaction (OER) but suffer from high activation overpotentials. Herein, in situ structural reconstruction of V-doped Ni 2 P pre-catalyst to form highly active NiV oxyhydroxides for OER is reported, during which the partial dissolution of V creates a disordered Ni structure with an enlarged electrochemical surface area. Operando electrochemical impedance spectroscopy reveals that the synergistic interaction between the Ni hosts and the remaining V dopants can regulate the electronic structure of NiV oxyhydroxides, which leads to enhanced kinetics for the adsorption of *OH and deprotonation of *OOH intermediates. Raman spectroscopy and X-ray absorption spectroscopy further demonstrate that the increased content of active β-NiOOH phase with the disordered Ni active sites contributes to OER activity enhancement. Density functional theory calculations verify that the V dopants facilitate the generation of *O intermediates during OER, which is the rate-determining step for realizing efficient O 2 evolution. Optimization of these properties endows the NiV oxyhydroxide electrode with a low overpotential of 221 mV to deliver a current density of 10 mA cm −2 and excellent stability in the alkaline electrolyte.

Electrochemical water splitting has attracted considerable attention for the production of hydrogen fuel by using renewable energy resources. However, the sluggish reaction kinetics make it essential to explore precious-metal-free electrocatalysts with superior activity and long-term stability. Tremendous efforts have been made in exploring electrocatalysts to reduce the energy barriers and improve catalytic efficiency. This review summarizes different categories of precious-metal-free electrocatalysts developed in the past 5 years for alkaline water splitting. The design strategies for optimizing the electronic and geometric structures of electrocatalysts with enhanced catalytic performance are discussed, including composition modulation, defect engineering, and structural engineering. Particularly, the advancement of operando/in situ characterization techniques toward the understanding of structural evolution, reaction intermediates, and active sites during the water splitting process are summarized. Finally, current challenges and future perspectives toward achieving efficient catalyst systems for industrial applications are proposed. This review will provide insights and strategies to the design of precious-metalfree electrocatalysts and inspire future research in alkaline water splitting.

Metal–organic frameworks (MOFs) are considered to be promising candidates for electrochemical water splitting. However, most MOFs are characterized by low electronic conductivity limiting their use as bulk materials for anodes and cathodes. Furthermore, the understanding of the critical parameters controlling the activity and stability of MOF electrocatalysts is still insufficient. Herein, a systematic analysis is presented of the key structural parameters controlling the oxygen evolution reaction (OER) performance and stability of a representative family of bimetallic NiFe‐MOFs, where the role of the metal cations on the accessible active sites and intrinsic activity can be investigated independently from the crystal structure. The models and in‐depth structural and morphological characterizations reveal a hierarchy of properties affecting the OER activity with accessible sites and intrinsic activity playing a major role in the charge transfer efficiency. Optimization of these properties and addition of a conductive support substrate leads to efficient MOF‐nanocomposite electrocatalysts achieving a low overpotential of 258 mV at a current density of 10 mA cm−2 with a small Tafel slope of 49 mV dec−1 and excellent stability for more than 32 h of continuous OER in alkaline medium.

While direct solar‐driven water splitting has been investigated as an important technology for low‐cost hydrogen production, the systems demonstrated so far either required expensive materials or presented low solar‐to‐hydrogen (STH) conversion efficiencies, both of which increase the levelized cost of hydrogen (LCOH). Here, a low‐cost material system is demonstrated, consisting of perovskite/Si tandem semiconductors and Ni‐based earth‐abundant catalysts for direct solar hydrogen generation. NiMo‐based hydrogen evolution reaction catalyst is reported, which has innovative “flower‐stem” morphology with enhanced reaction sites and presents very low reaction overpotential of 6 mV at 10 mA cm−2. A perovskite solar cell with an unprecedented high open circuit voltage (Voc) of 1.271 V is developed, which is enabled by an optimized perovskite composition and an improved surface passivation. When the NiMo hydrogen evolution catalyst is wire‐connected with an optimally designed NiFe‐based oxygen evolution catalyst and a high‐performance perovskite‐Si tandem cell, the resulting integrated water splitting cell achieves a record 20% STH efficiency. Detailed analysis of the integrated system reveals that STH efficiencies of 25% can be achieved with realistic improvements in the perovskite cell and an LCOH below ≈$3 kg−1 is feasible.