Bioflocculation is a physicochemical technique often employed to efficiently remove colloidal water pollutants. Consequently, in this study, a bioflocculant was produced, characterised and applied to remove pollutants in mine wastewater. The maximum flocculation activity of 92% was recorded at 30 °C, pH 9.0 when maltose and urea were used as energy sources and 72 h of fermentation at the inoculum size of 1% (v/v). K+ proved to be a favourable cation. The bioflocculant yield of 4 g/L was obtained. Scanning electron microscopy illustrated a hexagonal-like structure of the bioflocculant. It is composed of carbohydrates and proteins in mass proportion of 88.6 and 9.5%, respectively. The Fourier transform infrared spectrum revealed the presence of hydroxyl, amide and amino functional groups. More than 73% of the bioflocculant was obtained after exposure to 600 °C using the thermogravimetric analyser. Human embryonic kidney 293 (HEK 293) cells exhibited 95% viability after being treated with 200 µg/µL of the bioflocculant. The flocculation mechanisms were proposed to be as a result of a double layer compression by K+, chemical reactions and bridging mechanism. The removal efficiencies of 59, 72, and 75% on biological oxygen demand, chemical oxygen demand and sulphur, were obtained respectively. Thus, the bioflocculant have potential use in wastewater treatment.

Background Endophytes, especially those that are found from ethnopharmacologically noteworthy medicinal plants have attracted attention due to their diverse bioactive metabolites of pharmacological importance. Methods This study aimed at isolating endophytic bacterium from the leaves of Anredera cordifolia CIX1 for its bioactive metabolites. The endophytic isolates were identified by 16S rRNA sequence and investigated for antibiotic sensitivity using different antibiotics. The secondary metabolites were evaluated for antibacterial activity against four bacterial strains. The 2-diphenyl-1-picrylhydrazyl (DPPH) and 2, 2′-azinobis (3- ethylbenzothiazoline-6-sulfonic acid) (ABTS) methods were used to assess their scavenging activities. The chemical components were analysed by gas chromatography-mass spectrometry (GC-MS). Results Out of 13 isolates, Isolate 1 was identified as Pseudomonas aeruginosa CP043328.1. It was resistant to clindamycin, ertapenem, penicillin G, amoxicillin, cephalothin and kanamycin but sensitive to imipenem, meropenem, and gentamycin. Its extract demonstrated antibacterial activity with minimum inhibitory concentration value of 0.098 against Bacillus cereus (ATCC 10102) and Staphylococcus aureus (ATCC 25925) and 0.391 mg/ml against Escherichia coli (ATCC 25922) and Proteus mirabilis (ATCC 25933). The extract revealed DPPH and ABTS scavenging activities with half maximal inhibitory concentration value of 0.650 mg/ml and 0.15 mg/ml, respectively. The GC-MS revealed a total of 15 compounds with diisooctyl phthalate (50.51%) and [1, 2, 4] oxadiazole, 5-benzyl-3 (10.44%) as major components. Conclusions P. aeruginosa CP043328.1 produced secondary metabolites with antibacterial and antioxidant activities.

No abstract

A variety of flocculants have been used to aggregate colloidal substances. However, recently, owing to the adverse effects and high costs of conventional flocculants, natural flocculants such as microbial flocculants are gaining attention. The aim of the study was to produce and characterize a bioflocculant from Pichia kudriavzevii MH545928.1 and apply it in wastewater treatment. A mixture of butanol and chloroform (5:2 v/v) was used to extract the bioflocculant. Phenol–sulphuric acid, Bradford and Carbazole assays were utilized for the identification of carbohydrates, proteins and uronic acid, respectively. Scanning electron microscopy (SEM) and elemental detector were employed to determine the surface morphology and elemental compositions. The removal efficiencies were 73%, 49% and 47% for BOD, COD and P, respectively. The bioflocculant (2.836 g/L) obtained showed the presence of carbohydrates (69%), protein (11%) and uronic acid (16%). The bioflocculant displayed a cumulus-like structure and the elemental composition of C (16.92%), N (1.03%), O (43:76%), Na (0.18%), Mg (0.40%), Al (0.80%), P (14.44%), S (1.48%), Cl (0.31%), K (0.34%) and Ca (20.35). It showed the removal efficiencies of 43% (COD), 64% (BOD), 73% (P) and 50% (N) in coal mine wastewater. This bioflocculant is potentially viable to be used in wastewater treatment.

No abstract