This is the accepted version of the paper.This version of the publication may differ from the final published version. Permanent repository link

This work describes the development and use of pappus-like structures as sensitive sensors to detect minute air-flow motions. We made such sensors from pappi taken from nature-grown seed, whose filiform hairs’ length-scale is suitable for the study of large-scale turbulent convection flows. The stem with the pappus on top is fixated on an elastic membrane on the wall and tilts under wind-load proportional to the velocity magnitude in direction of the wind, similar as the biological sensory hairs found in spiders, however herein the sensory hair has multiple filiform protrusions at the tip. As the sensor response is proportional to the drag on the tip and a low mass ensures a larger bandwidth, lightweight pappus structures similar as those found in nature with documented large drag are useful to improve the response of artificial sensors. The pappus of a Dandelion represents such a structure which has evolved to maximize wind-driven dispersion, therefore it is used herein as the head of our sensor. Because of its multiple hairs arranged radially around the stem it generates uniform drag for all wind directions. While still being permeable to the flow, the hundreds of individual hairs on the tip of the sensor head maximize the drag and minimize influence of pressure gradients or shear-induced lift forces on the sensor response as they occur in non-permeable protrusions. In addition, the flow disturbance by the sensor itself is limited. The optical recording of the head-motion allows continuously remote-distance monitoring of the flow fluctuations in direction and magnitude. Application is shown for the measurement of a reference flow under isothermal conditions to detect the early occurrence of instabilities.

Experimental and numerical studies of the behavior of a slurry in a shear flow over a rough surface with a defined micro-structure are presented. A new ring shear device was built which contains an optically transparent test chamber. Its bottom wall contains arrays of micro-cantilever force sensors simulating a defined surface roughness created by deep-etching of micro-pillars in a silicon wafer. The results of visual observation of the interaction of the suspension with the structured surface during severe deformation are shown. Observations comprise the liquid phase motion, i.e., the interaction between the liquid phase and solid particles, the movement of separate particles and their interactions with the micro-pillars. Abrupt changes in rotational motion and translational velocity of particles are observed that induce mutual collisions and successive formation and break-up of cluster structures of various types. In addition to the experiments the process was simulated with discrete element (DEM) simulations. Many characteristics found in the experiments are reproduced by the simulations. Furthermore the physical quantities of the process like contact forces or velocities can be quantified which helps us to develop more detailed models of the abrasive behavior of slurries.

A biomimetic approach is used to generate a directed transversal transportation of micron-sized particles in liquids based on the principle of cilia-type arrays in coordinated motion. Rows of flaps mimicking planar cilia are positioned off-centre along an array of cavities covered with membranes that support the flaps. These membranes are deflected from a concave to a convex shape and vice versa by pneumatic actuation applying positive and negative pressures (relative to the ambient) inside the cavities. As a result, the flap on top of the membrane tilts to the left or right within such a pressure cycle, performing a beat stroke. Since each cavity can be addressed in the device individually and in rapid succession, waves of coordinated flap motion can be run along the wall. Such metachronal waves are generated and transport of particles along the cilia surface is achieved in both symplectic and antiplectic direction. It is shown that the initial tilt of the flaps relative to the wall-normal determines the direction of transport.

No abstract