The electronic systems of aerospace techniques include power microwave devices and analog and digital semiconductor devices. The radiation of power microwave devices may effect on the semiconductor devices. So it’s necessary to know the electromagnetic effects of this radiation on the semiconductor devices. The electromagetic effects of the microwave radiation exposure on the semiconductor diodes, the main part of any semiconductor devices, are considered. The changes of current – voltage characteristics of the diodes are explained, outgoing from the model of the recombination of carriers through deep energy level recombination center in forbidden gap induced by microwave radiation field.

No abstract

Integrated circuits are used in electronic equipment of spaceships. Therefore, they are impacted by ionizing radiation during space mission. It leads to electronic equipment failures. At present operational amplifiers are base elements of analog electronic devices. Radiation impact leads to degradation of operational amplifiers input stages. Input bias current increasing and input offset voltage drifts are the results of ionizing radiation expose of operational amplifiers. Therefore, space application electronic equipment fails after accumulation of limit dose. It isn’t difficult to estimate radiation degradation of input bias currents of bipolar operational amplifiers, but estimation of dose dependence of input offset voltage drift is more complex issue. Schematic modeling technique based on Gummel–Poon transistor model for estimation of input offset voltage drift produced by space radiation impact was experimentally verified for LM324 operational amplifier and presented in this work. Radiation sensitive parameters of Gummel–Poon model were determined using 2N2907 bipolar pnp transistor.

In recent years, growing attention has been paid to the threat posed by highpower microwave electromagnetic interference, which can couple into semiconductor electronic devices intentionally from microwave sources or unintentionally due to the proximity to general environmental HF signals. This paper examines physical mechanism of malfunction and destruction of electronic devices by high power microwaves electromagnetic pulse.