Abstract.A homogenization method to model a stack of second generation (2G) High Temperature Superconducting (HTS) tapes under AC applied transport current or magnetic field has been obtained. The idea is to find an anisotropic bulk equivalent for the stack, such that the geometrical layout of the internal alternating structures of insulating, metallic, superconducting and substrate layers is "washed" out while keeping the overall electromagnetic behavior of the original stack. We disregard assumptions upon the shape of the critical region and use a power law E-J relationship allowing for overcritical current densities to be considered. The method presented here allows for a computational speedup factor of up to 2 orders of magnitude when compared to full 2-D simulations taking into account the actual dimensions of the stacks without compromising accuracy.

The emergence of second-generation high temperature superconducting tapes has favored the development of large-scale superconductor systems. The mathematical models capable of estimating electromagnetic quantities in superconductors have evolved from simple analytical models to complex numerical models. The available analytical models are limited to the analysis of single wires or infinite arrays that, in general, do not represent actual devices in real applications. The numerical models based on finite element method using the H formulation of the Maxwell's equations are useful for the analysis of medium-size systems, but their application in large-scale systems is problematic due to the excessive computational cost in terms of memory and computation time. Then it is necessary to devise new strategies to make the computation more efficient. The homogenization and the multi-scale methods have successfully simplified the description of the systems allowing the study of large-scale systems. Also, efficient calculations have been recently achieved using the T-A formulation. In the present work, we propose a series of adaptations to the multi-scale and homogenization methods so that they can be efficiently used in conjunction with the T-A formulation to compute the distribution of current density and hysteresis losses in the superconducting layer of superconducting tapes. The computation time and the amount of memory are substantially reduced up to a point that it is possible to achieve real-time simulations of HTS large-scale systems under slow ramping cycles of practical importance on personal computers.

Abstract. Use of 2G HTS coated conductors in several power applications has become popular in recent years. Their large current density under high magnetic fields makes them suitable candidates for high power capacity applications such as stacks of tapes, coils, magnets, cables and current leads. For this reason, modeling and simulation of their electromagnetic properties is very desirable in the design and optimization processes. For many applications, when symmetries allow it, simple models consisting of 1D or 2D representations are well suited for providing a satisfying description of the problem at hand. However, certain designs such as racetrack coils and finite-length or non-straight stacks, do pose a 3D problem that cannot be easily reduced to a 2D configuration. Full 3-D models have been developed, but their use for simulating superconducting devices is a very challenging task involving a large-scale computational problem. In this work, we present a new method to simulate the electromagnetic transient behavior of 2G HTS stacks and coils. The method, originally used to model stacks of straight superconducting tapes or circular coils in 2D, is now extended to 3D. The main idea is to construct an anisotropic bulklike equivalent for the stack or coil, such that the geometrical layout of the internal alternating structures of insulating, metallic, superconducting and substrate layers is reduced while keeping the overall electromagnetic behavior of the original device. Besides the aforementioned interest in modeling and simulating 2G HTS coated conductors, this work gives a further step towards efficient 3D modeling and simulation of superconducting devices for large scale applications.

Numerical models are powerful tools to predict the electromagnetic behavior of superconductors. In recent years, a variety of models have been successfully developed to simulate high-temperature-superconducting (HTS) coated conductor tapes. While the models work well for the simulation of individual tapes or relatively small assemblies, their direct applicability to devices involving hundreds or thousands of tapes, as for example coils used in electrical machines, is questionable. Indeed the simulation time and memory requirement can quickly become prohibitive. In this article, we develop and compare two different models for simulating realistic HTS devices composed of a large number of tapes: 1) the homogenized model simulates the coil using an equivalent anisotropic homogeneous bulk with specifically developed current constraints to account for the fact that each turn carries the same current; 2) the multi-scale model parallelizes and reduces the computational problem by simulating only several individual tapes at significant positions of the coil's cross-section using appropriate boundary conditions to account for the field generated by the neighboring turns. Both methods are used to simulate a coil made of 2000 tapes, and compared against the widely used Hformulation finite element model that includes all the tapes. Both approaches allow speeding-up simulations of large number of HTS tapes by 1-3 orders of magnitudes, while keeping a good accuracy of the results. Such models could be used to design and optimize large-scale HTS devices. I.