Hydrogen is an important raw material in chemical industries, and the steam reforming of light hydrocarbons (such as methane) is the most used process for its production. In this process, the use of a catalyst is mandatory and, if compared to precious metal-based catalysts, Ni-based catalysts assure an acceptable high activity and a lower cost. The aim of a distributed hydrogen production, for example, through an on-site type hydrogen station, is only reachable if a novel reforming system is developed, with some unique properties that are not present in the large-scale reforming system. These properties include, among the others, (i) daily startup and shutdown (DSS) operation ability, (ii) rapid response to load fluctuation, (iii) compactness of device, and (iv) excellent thermal exchange. In this sense, the catalyst has an important role. There is vast amount of information in the literature regarding the performance of catalysts in methane steam reforming. In this short review, an overview on the most recent advances in Ni based catalysts for methane steam reforming is given, also regarding the use of innovative structured catalysts.

No abstract

No abstract

Since the late 1980s, the scientific community has been attracted to microwave energy as an alternative method of heating, due to the advantages that this technology offers over conventional heating technologies. In fact, differently from these, the microwave heating mechanism is a volumetric process in which heat is generated within the material itself, and, consequently, it can be very rapid and selective. In this way, the microwave-susceptible material can absorb the energy embodied in the microwaves. Application of the microwave heating technique to a chemical process can lead to both a reduction in processing time as well as an increase in the production rate, which is obtained by enhancing the chemical reactions and results in energy saving. The synthesis and sintering of materials by means of microwave radiation has been used for more than 20 years, while, future challenges will be, among others, the development of processes that achieve lower greenhouse gas (e.g., CO 2 ) emissions and discover novel energy-saving catalyzed reactions. A natural choice in such efforts would be the combination of catalysis and microwave radiation. The main aim of this review is to give an overview of microwave applications in the heterogeneous catalysis, including the preparation of catalysts, as well as explore some selected microwave assisted catalytic reactions. The review is divided into three principal topics: (i) introduction to microwave chemistry and microwave materials processing; (ii) description of the loss mechanisms and microwave-specific effects in heterogeneous catalysis; and (iii) applications of microwaves in some selected chemical processes, including the preparation of heterogeneous catalysts.A chemical process is conventionally energized by means of conductive heating with a steam boiler as a typical heat source. Nevertheless, a large variety of other forms of energy can be applied for PI, including ultrasounds (for reactions or crystal nucleation), light (in photocatalytic processes), electric fields (in extraction or for orientation of molecules), or microwaves. The microwave (dielectric) heating of materials has been known for a long time, and microwave ovens have been developed from more than 60 years. The studies by Gedye et al. in 1986 and 1988 [3,4] opened a period of very intensive investigation of the microwave effects on chemical reactions in homogeneous systems. Since then, hundreds of research papers have been published, and research has also expanded toward heterogeneous catalysis and its related chemical processes. This review gives an overview of the application of microwave technology to heterogeneous catalysis, including various chemical processes, as well as to the preparation of catalysts.

No abstract