Biocatalyzed hydrogen production in a continuous flow microbial fuel cell with a gas phase cathode Tartakovsky, B.; Manuel, M.-F.; Neburchilov, V.; Wang, H.; Guiot, S. R.Contact us / Contactez nous: nparc.cisti@nrc-cnrc.gc.ca.
abstractA single liquid chamber microbial fuel cell (MFC) with a gas-collection compartment was continuously operated under electrically assisted conditions for hydrogen production. Graphite felt was used for anode construction, while the cathode was made of Pd/Pt coated Toray carbon fiber paper with a catalyst loading of 0.5 mg cm −2 . To achieve hydrogen production, the MFC was connected to a power supply and operated at voltages in a range of 0.5-1.3 V. Either acetate or glucose was used as a source of carbon. At an acetate load of1.67g(L A d) −1 , the volumetric rate of hydrogen production reached 0.98 L STP (L A d) −1 when a voltage of 1.16 V was applied. This corresponded to a hydrogen yield of 2 mol (mol-acetate) −1 with a 50% conversion efficiency. Throughout the experiment, MFC efficiency was adversely affected by the metabolic activity of methanogenic microorganisms, which competed with exoelectrogenic microorganisms for the carbon source and consumed part of the hydrogen produced at the cathode.Crown
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.