Abstract. Physically Unclonable Functions (PUFs) are an emerging technology and have been proposed as central building blocks in a variety of cryptographic protocols and security architectures. However, the security features of PUFs are still under investigation: Evaluation results in the literature are difficult to compare due to varying test conditions, different analysis methods and the fact that representative data sets are publicly unavailable. In this paper, we present the first large-scale security analysis of ASIC implementations of the five most popular intrinsic electronic PUF types, including arbiter, ring oscillator, SRAM, flip-flop and latch PUFs. Our analysis is based on PUF data obtained at different operating conditions from 96 ASICs housing multiple PUF instances, which have been manufactured in TSMC 65 nm CMOS technology. In this context, we present an evaluation methodology and quantify the robustness and unpredictability properties of PUFs. Since all PUFs have been implemented in the same ASIC and analyzed with the same evaluation methodology, our results allow for the first time a fair comparison of their properties.
We present a silicon characterization vehicle implementing six different constructions of intrinsic Physically Unclonable Functions (PUFs). The design contains four different memory-based PUFs, one of which is a novel buskeeper PUF, and two different delay-based PUFs. Test chips are fabricated in 65 nm Low Power (LP) technology, using a standard cell ASIC design flow for the memory-based PUFs and a full custom flow for the delay-based ones. This test vehicle enables a comprehensive experimental evaluation of individual PUF implementations as well as a comparative analysis across different PUF types for the same silicon technology. PUF responses are obtained from 192 device samples and the uniqueness and reliability of the implemented PUFs are evaluated. In addition, the effects of varying temperature and silicon device ageing on the PUF characteristics are extensively studied.
Applications of true random number generators (TRNGs) span from art to numerical computing and system security. In cryptographic applications, TRNGs are used for generating new keys, nonces and masks. For this reason, a TRNG is an essential building block and often a point of failure for embedded security systems. One type of primitives that are widely used as source of randomness are ring oscillators. For a ring-oscillator-based TRNG, the true randomness originates from its timing jitter. Therefore, determining the jitter strength is essential to estimate the quality of a TRNG. In this paper, we propose a method to measure the jitter strength of a ring oscillator implemented on an FPGA. The fast tapped delay chain is utilized to perform the on-chip measurement with a high resolution. The proposed method is implemented on both a Xilinx FPGA and an Intel FPGA. Fast carry logic components on different FPGAs are used to implement the fast delay line. This carry logic component is designed to be fast and has dedicated routing, which enables a precise measurement. The differential structure of the delay chain is used to thwart the influence of undesirable noise from the measurement. The proposed methodology can be applied to other FPGA families and ASIC designs.
In this paper we present a novel true random number generator based on high-precision edge sampling. We use two novel techniques to increase the throughput and reduce the area of the proposed randomness source: variable-precision phase encoding and repetitive sampling. The first technique consists of encoding the oscillator phase with high precision in the regions around the signal edges and with low precision everywhere else. This technique results in a compact implementation at the expense of reduced entropy in some samples. The second technique consists of repeating the sampling at high frequency until the phase region encoded with high precision is captured. This technique ensures that only the high-entropy bits are sent to the output. The combination of the two proposed techniques results in a secure TRNG, which suits both ASIC and FPGA implementations. The core part of the proposed generator is implemented with 10 look-up tables (LUTs) and 5 flip-flops (FFs) of a Xilinx Spartan-6 FPGA, and achieves a throughput of 1.15 Mbps with 0.997 bits of Shannon entropy. On Intel Cyclone V FPGAs, this implementation uses 10 LUTs and 6 FFs, and achieves a throughput of 1.07 Mbps. This TRNG design is supported by a stochastic model and a formal security evaluation.
No abstract
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
customersupport@researchsolutions.com
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.