-There is a long-standing vision of embedding backscatter nodes like RFIDs into everyday objects to build ultralow power ubiquitous networks. A major problem that has challenged this vision is that backscatter communication is neither reliable nor efficient. Backscatter nodes cannot sense each other, and hence tend to suffer from colliding transmissions. Further, they are ineffective at adapting the bit rate to channel conditions, and thus miss opportunities to increase throughput, or transmit above capacity causing errors. This paper introduces a new approach to backscatter communication. The key idea is to treat all nodes as if they were a single virtual sender. One can then view collisions as a code across the bits transmitted by the nodes. By ensuring only a few nodes collide at any time, we make collisions act as a sparse code and decode them using a new customized compressive sensing algorithm. Further, we can make these collisions act as a rateless code to automatically adapt the bit rate to channel quality -i.e., nodes can keep colliding until the base station has collected enough collisions to decode. Results from a network of backscatter nodes communicating with a USRP backscatter base station demonstrate that the new design produces a 3.5× throughput gain, and due to its rateless code, reduces message loss rate in challenging scenarios from 50% to zero.

RFIDs are emerging as a vital component of the Internet of Things. In 2012, billions of RFIDs have been deployed to locate equipment, track drugs, tag retail goods, etc. Current RFID systems, however, can only identify whether a tagged object is within radio range (which could be up to tens of meters), but cannot pinpoint its exact location. Past proposals for addressing this limitation rely on a line-of-sight model and hence perform poorly when faced with multipath effects or non-line-of-sight, which are typical in real-world deployments. This paper introduces the first fine-grained RFID positioning system that is robust to multipath and non-line-of-sight scenarios. Unlike past work, which considers multipath as detrimental, our design exploits multipath to accurately locate RFIDs. The intuition underlying our design is that nearby RFIDs experience a similar multipath environment (e.g., reflectors in the environment) and thus exhibit similar multipath profiles . We capture and extract these multipath profiles by using a synthetic aperture radar (SAR) created via antenna motion. We then adapt dynamic time warping (DTW) techniques to pinpoint a tag's location. We built a prototype of our design using USRP software radios. Results from a deployment of 200 commercial RFIDs in our university library demonstrate that the new design can locate misplaced books with a median accuracy of 11~cm.