No abstract

No abstract

The influence of dodecylamine acetate (DDA) and myristyl trimethyl ammonium chloride (1431) on the flotation behavior of muscovite and kaolinite were studied in this paper. The condition which can efficiently separate the muscovite and kaolinite was found out: 5×10-5mol·L-1~1×10-4mol·L-11431 as collector and pH=5.The feasibility of flotation separation in this condition was validated by artificial mixed minerals separation test. The results of zeta potential measurement, infrared spectrum analysis and adsorption quantity test show that 1431 was adsorbed on the surface on muscovite and kaolinite by static electricity adsorption. The difference of adsorption quantity was consistent with results of the single mineral flotation test.

Traditional measurement and modern SEM-based mineral liberation analysis (MLA) system were employed to obtain the process mineralogy characteristic of Jinshan gold ore which had high Au (6.20g/t) and low sulfide (0.25%). XBSE, XBSE_STD and SPL_Lt MLA modes are used in this case, which make the results timely, reliable and quantitative. The gold behaves irregular granular native gold or silver-bearing native gold of which the Au content ranging from 93%to 100%. Gold mainly occurred as liberated or in gold-carrying gangue minerals, such as quartz and biotite,rarely in pyrite in the form of fissure gold, inter-crystalline gold or inclusion gold . The particle size of the Gold minerals range from 0.001mm to 0.010mm , which is too fine to recover from beneficiating method. Combined process should be adopted.

In order to determine the weldability of a new type of low alloy high strength steel, the feasibility of the proposed welding process was examined and the welding procedure qualification of a new type of ultrahigh strength steel WELDOX 1100 was carried out through the weldability test of the welded joint, the small iron research and the highest hardness test. . The test result satisfies the specification requirements and proves that the proposed welding process plan is correct and feasible. It provides a reliable basis for the preparation of welding process documents and ensures the smooth development of the company's new products.