No abstract

In this paper, a novel sensitivity amplification method for fiber-optic in-line Mach-Zehnder interferometer (MZI) sensors has been proposed and demonstrated. The sensitivity magnification is achieved through a modified Vernier-effect. Two cascaded in-line MZIs based on offset splicing of single mode fiber (SMF) have been used to verify the effect of sensitivity amplification. Vernier-effect is generated due to the small free spectral range (FSR) difference between the cascaded in-line MZIs. Frequency component corresponding to the envelope of the superimposed spectrum is extracted to take Inverse Fast Fourier Transform (IFFT). Thus we can obtain the envelope precisely from the messy superimposed spectrum. Experimental results show that a maximum sensitivity amplification factor of nearly 9 is realized. The proposed sensitivity amplification method is universal for the vast majority of in-line MZIs.

An ultra-wideband fiber optic acoustic sensor based on graphene diaphragm with a thickness of 10nm has been proposed and experimentally demonstrated. The two reflectors of the extrinsic Fabry-Perot interferometer is consist of fiber endface and graphene diaphragm, and the cavity is like a horn-shape. The radius of the effective area of the ultrathin graphene diaphragm is 1mm. Attributed to the strong van der Waals force between the diaphragm and the ceramic ferrule, the sensor head can be applied not only in the air but also underwater. Experimental results illustrate that ultra-wideband frequency response is from 5Hz to 0.8MHz, covering the range from infrasound to ultrasound. The noise-limited minimum detectable pressure level of 0.77Pa/Hz@5Hz and 33.97μPa/Hz@10kHz can be achieved, and the applied sound pressure is 114dB and 65.8dB, respectively. The fiber optic acoustic sensor may have a great potential in seismic wave monitoring, photoacoustic spectroscopy and photoacoustic imaging application due to its compact structure, simple manufacturing, and low cost.