Pressure sensors are a key component in electronic skin (e-skin) sensing systems. Most reported resistive pressure sensors have a high sensitivity at low pressures (<5 kPa) to enable ultra-sensitive detection. However, the sensitivity drops significantly at high pressures (>5 kPa), which is inadequate for practical applications. For example, actions like a gentle touch and object manipulation have pressures below 10 kPa, and 10–100 kPa, respectively. Maintaining a high sensitivity in a wide pressure range is in great demand. Here, a flexible, wide range and ultra-sensitive resistive pressure sensor with a foam-like structure based on laser-scribed graphene (LSG) is demonstrated. Benefitting from the large spacing between graphene layers and the unique v-shaped microstructure of the LSG, the sensitivity of the pressure sensor is as high as 0.96 kPa−1 in a wide pressure range (0 ~ 50 kPa). Considering both sensitivity and pressure sensing range, the pressure sensor developed in this work is the best among all reported pressure sensors to date. A model of the LSG pressure sensor is also established, which agrees well with the experimental results. This work indicates that laser scribed flexible graphene pressure sensors could be widely used for artificial e-skin, medical-sensing, bio-sensing and many other areas.

Graphene strain sensors have promising prospects of applications in detecting human motion. However, the shortage of graphene growth and patterning techniques has become a challenging issue hindering the application of graphene strain sensors. Therefore, we propose wafer-scale flexible strain sensors with high-performance, which can be fabricated in one-step laser scribing. The graphene films could be obtained by directly reducing graphene oxide film in a Light-Scribe DVD burner. The gauge factor (GF) of the graphene strain sensor (10 mm × 10 mm square) is 0.11. In order to enhance the GF further, graphene micro-ribbons (20 μm width, 0.6 mm long) has been used as strain sensors, of which the GF is up to 9.49. The devices may conform to various application requirements, such as high GF for low-strain applications and low GF for high deformation applications. The work indicates that laser scribed flexible graphene strain sensors could be widely used in medical-sensing, bio-sensing, artificial skin and many other areas.

The synaptic activities in the nervous system is the basis of memory and learning behaviors, and the concept of biological synapse has also spurred the development of neuromorphic engineering. In recent years, the hardware implementation of the biological synapse has been achieved based on CMOS circuits, resistive switching memory, and field effect transistors with ionic dielectrics. However, the artificial synapse with regulatable plasticity has never been realized of the device level. Here, an artificial dynamic synapse based on twisted bilayer graphene is demonstrated with tunable plasticity. Due to the ambipolar conductance of graphene, both behaviors of the excitatory synapse and the inhibitory synapse could be realized in a single device. Moreover, the synaptic plasticity could also be modulated by tuning the carrier density of graphene. Because the artificial synapse here could be regulated and inverted via changing the bottom gate voltage, the whole process of synapse development could be imitated. Hence, this work would offer a broad new vista for the 2D material electronics and guide the innovation of neuro-electronics fundamentally.