No abstract

In this study, the authors deposited silicon oxynitride films by Radio Frequency Plasma Enhanced Chemical Vapour Deposition (RF PECVD) method. The research explores the relationship between the deposition process parameters and the optical properties of the deposited SiO x N y films. The optical constants of SiO x N y films were measured and calculated by spectroscopic ellipsometry method. Additionally, the authors investigated the possibility of controlling the deposited film composition by the flow ratio of different gaseous precursors: ammonia (NH 3 ), diluted silane (2%SiH 4 /98%N 2 ), nitrous oxide (N 2 O) and nitrogen (N 2 ). The gas mixture introduced to the working chamber during the growth of the film has the influence on the Si-O and Si-N bonds formation and the ratio between these bonds determines the refractive index of the deposited film.

In this work, the photocatalytic properties of thin films based on titanium oxides for application on flexible glass in photovoltaic panels were presented. Thin films were prepared by gas impulse magnetron sputtering (GIMS), where the gas injection on a target was synchronized in time with the electric pulse supplying the magnetron with the Ti target. The deposition process was carried out under various Ar/O2 atmospheres (with a content of 5–8% O2). The as-deposited TiOx films were non-stoichiometric. The influence of deposition parameters on optical properties, microstructure, hardness, and elastic modulus was examined. In addition, the dependence between the oxygen content in the sputtering atmosphere and the photocatalytic activity of the coatings was examined. The scratch resistance of the coatings and their adhesion to flexible glass were also investigated. It has been shown that the GIMS technique can be used for efficient deposition of non-stoichiometric TiOx coatings on substrates sensitive to the temperature as thin flexible glass and, at the same time, characterized by high adhesion. The TiOx-based semiconductor coatings prepared in this study can be used successfully in transparent electronics and in the construction of modern photovoltaic panels due to their photocatalytic activity, high hardness, and high level of transparency.