Abstract:In this paper, we present the results of an economic feasibility study and propose a system structure to test and maintain electrical stability. In addition, we present real operation results after constructing a remote microgrid on an island in South Korea. To perform the economic feasibility study, a commercial tool called HOMER was used. The developed remote microgrid consists of a 400 kW wind turbine (WT) generator, 314 kW photovoltaic (PV) generator, 500 kVA × 2 grid forming inverter, 3 MWh lithium ion battery, and an energy management system (EMS). The predicted renewable energy fraction was 91% and real operation result was 82%. The frequency maintaining rate of the diesel power plants was 57% but the remote microgrid was 100%. To improve the operating efficiency of the remote microgrid, we investigated the output range of a diesel generator.

Abstract:In a conventional distribution system, protection algorithms are designed to operate on a unidirectional high fault-current level. In a microgrid, a fault current from distributed generation (DG) may bring about a relay malfunction because of the bidirectional and relatively small fault current. Therefore, the conventional protection scheme is not applicable to microgrids and a new protection method must be developed. In this paper, two protection coordination algorithms which can be applied for facility and secondary microgrids are proposed, respectively. The proposed protection algorithms eliminate faults not by the EMS signal but by directional relays. Moreover, this makes the algorithms flexible regardless of the types and numbers of DG. The proposed protection algorithms were simulated at the KEPCO RI Microgrid Demonstration Site.

No abstract

This article focuses on the overall system engineering aspects of low voltage DC (LVDC) electricity distribution.. The interdependencies between different parts of an LVDC distribution system are discussed emphasising the issues related with the interconnection of user-end LVDC installations and public LVDC systems. The main objective is to illustrate the importance of the total system engineering over the piecewise design approach. The aspects affecting on the selection of the DC voltage level, system structures and earthing arrangements are considered. A methodology for selecting the technoeconomic optimal voltage level within the boundary conditions set by the DC system application and the operating environment is introduced with example calculations. Presented discussions and results provide support especially for the development of the standardisation of the LVDC technology

Abstract:A microgrid is a micro-power system composed of local distributed generators, energy storage systems, loads, and other components in a local power network. Because renewable energy sources show relatively large output power variation, the integration of distributed generators in a microgrid often requires the installation of a large-scale energy storage system. The energy storage system is connected to a local AC bus via the DC/AC converter with an output inductor-capacitor (LC) filter. The energy storage system power converters generally form the local AC bus voltage. This grid-forming operation requires fast and robust voltage control to properly maintain a stable energy flow and high power quality in the local AC bus. In this paper, two major voltage control schemes-double-loop control and direct voltage control-are analytically compared, and their effects on the power quality of the microgrid are illustrated. The dynamic performance is compared through simulations and experimental results.