Gaining a thorough understanding of the reactions on the electrode surfaces of lithium batteries is critical for designing new electrode materials suitable for high-power, long-life operation. A technique for directly observing surface structural changes has been developed that employs an epitaxial LiMn(2)O(4) thin-film model electrode and surface X-ray diffraction (SXRD). Epitaxial LiMn(2)O(4) thin films with restricted lattice planes (111) and (110) are grown on SrTiO(3) substrates by pulsed laser deposition. In situ SXRD studies have revealed dynamic structural changes that reduce the atomic symmetry at the electrode surface during the initial electrochemical reaction. The surface structural changes commence with the formation of an electric double layer, which is followed by surface reconstruction when a voltage is applied in the first charge process. Transmission electron microscopy images after 10 cycles confirm the formation of a solid electrolyte interface (SEI) layer on both the (111) and (110) surfaces and Mn dissolution from the (110) surface. The (111) surface is more stable than the (110) surface. The electrode stability of LiMn(2)O(4) depends on the reaction rate of SEI formation and the stability of the reconstructed surface structure.

Considering the promising electrochemical performance of the recently reported pyrophosphate family in lithium ion batteries as well as the increasing importance of sodium ion batteries (SIBs) for emerging large‐scale applications, here, the crystal structure, electrochemical properties, and thermal stability of Na2FeP2O7, the first example ever reported in the pyrophosphate family for SIBs, are investigated. Na2FeP2O7 maintains well‐defined channel structures (triclinic framework under the P1 space group) and exhibits a reversible capacity of ≈90 mAh g−1 with good cycling performance. Both quasi‐equilibrium measurements and first‐principles calculations consistently indicate that Na2FeP2O7 undergoes two kinds of reactions over the entire voltage range of 2.0–4.5 V (vs Na/Na+): a single‐phase reaction around 2.5 V and a series of two‐phase reactions in the voltage range of 3.0–3.25 V. Na2FeP2O7 shows excellent thermal stability up to 500 °C, even in the partially desodiated state (NaFeP2O7), which suggests its safe character, a property that is very critical for large‐scale battery applications.

In order to confirm reasons that deteriorate cathode performances, Ni-rich Li[Ni0.7Mn0.3]O2 is modified by lithium isopropoxide to artificially provide lithium excess environment by forming Li2O on the surface of active materials. X-ray diffraction patterns indicate that the lithium oxide coating does not affect structural change comparing to the bare material. Scanning electron microscopy and transmission electron microscopy data show the presence of coating layers on the surface of Li[Ni0.7Mn0.3]O2. Electrochemical tests demonstrate that the Li2O-coated Li[Ni0.7Mn0.3]O2 exhibits a greater irreversible capacity with a small capacity because of the presence of insulating layers composed of lithium compounds on the active materials since these layers delay facile Li+ diffusion. Also, the Li2O layer forms byproducts such as Li2CO3, LiOH, and LiF, as are proved by X-ray photoelectron spectroscopy and time-of-flight secondary ion mass spectrometry. The presence of residual lithium tends to bond with hydrocarbons induced from decomposition of electrolytic salt during electrochemical reactions. And the reaction, accelerated by the decomposition of electrolytic salt that produces the byproducts, causes the formation of passive layers on the surface of active material. As a result, the new layers consequently impede diffusion of lithium ions that deteriorate electrochemical properties.

Spinel-structured lithium manganese oxide (LiMn(2)O(4)) cathodes have been successfully commercialized for various lithium battery applications and are among the strongest candidates for emerging large-scale applications. Despite its various advantages including high power capability, however, LiMn(2)O(4) chronically suffers from limited cycle life, originating from well-known Mn dissolution. An ironical feature with the Mn dissolution is that the surface orientations supporting Li diffusion and thus the power performance are especially vulnerable to the Mn dissolution, making both high power and long lifetime very difficult to achieve simultaneously. In this investigation, we address this contradictory issue of LiMn(2)O(4) by developing a truncated octahedral structure in which most surfaces are aligned to the crystalline orientations with minimal Mn dissolution, while a small portion of the structure is truncated along the orientations to support Li diffusion and thus facilitate high discharge rate capabilities. When compared to control structures with much smaller dimensions, the truncated octahedral structure as large as 500 nm exhibits better performance in both discharge rate performance and cycle life, thus resolving the previously conflicting aspects of LiMn(2)O(4).