No abstract

Here we demonstrate high-performance room-temperature NO sensors based on ultrathin ZnO nanorods/reduced graphene oxide (rGO) mesoporous nanocomposites. Ultrathin ZnO nanorods were loaded on rGO nanosheets by a facile two-step additive-free solution synthesis involving anchored seeding followed by oriented growth. The ZnO nanorod diameters were simply controlled by the seed diameters associated with the spatial confinement effects of graphene oxide (GO) nanosheets. Compared to the solely ZnO nanorods and rGO-based sensors, the optimal sensor based on ultrathin ZnO nanorods/rGO nanocomposites exhibited higher sensitivity and quicker p-type response to parts per million level of NO at room temperature, and the sensitivity to 1 ppm of NO was 119% with the response and recovery time being 75 and 132 s. Moreover, the sensor exhibited full reversibility, excellent selectivity, and a low detection limit (50 ppb) to NO at room temperature. In addition to the high transport capability of rGO as well as excellent NO adsorption ability derived from ultrathin ZnO nanorods and mesoporous structures, the superior sensing performance of the nanocomposites was attributed to the synergetic effect of ZnO and rGO, which was realized by the electron transfer across the ZnO-rGO interfaces through band energy alignment.

No abstract

Highly permeable and selective, as well as plasticization-resistant membranes are desired as promising alternatives for cost- and energy-effective CO separation. Here, robust mixed-matrix membranes based on an amino-functionalized zeolitic imidazolate framework ZIF-7 (ZIF-7-NH ) and crosslinked poly(ethylene oxide) rubbery polymer are successfully fabricated with filler loadings up to 36 wt%. The ZIF-7-NH materials synthesized from in situ substitution of 2-aminobenzimidazole into the ZIF-7 structure exhibit enlarged aperture size compared with monoligand ZIF-7. The intrinsic separation ability for CO /CH on ZIF-7-NH is remarkably enhanced as a result of improved CO uptake capacity and diffusion selectivity. The incorporation of ZIF-7-NH fillers simultaneously makes the neat polymer more permeable and more selective, surpassing the state-of-the-art 2008 Robeson upper bound. The chelating effect between metal (zinc) nodes of fillers and ester groups of a polymer provides good bonding, enhancing the mechanical strength and plasticization resistance of the neat polymer membrane. The developed novel ZIF-7 structure with amino-function and the resulting nanocomposite membranes are very attractive for applications like natural-gas sweetening or biogas purification.

We report the fabrication of one-dimensional highly electroconductive mesoporous graphene nanofibers (GNFs) by a chemical vapor deposition method using MgCO3·3H2O fibers as the template. The growth of such a unique structure underwent the first in situ decomposition of MgCO3·3H2O fibers to porous MgO fibers, followed by the deposition of carbon on the MgO surface, the removal of MgO by acidic washing, and the final self-assembly of wet graphene from single to double layer in drying process. GNFs exhibited good structural stability, high surface area, mesopores in large amount, and electrical conductivity 3 times that of carbon nanotube aggregates. It, used as an electrode in a 4 V supercapacitor, exhibited high energy density in a wide range of high power density and excellent cycling stability. The short diffusion distance for ions of ionic liquids electrolyte to the surface of GNFs yielded high surface utilization efficiency and a capacitance up to 15 μF/cm(2), higher than single-walled carbon nanotubes.