No abstract

In this work, a novel phase change energy storage wood (PCESW) was fabricated by impregnating solid-solid phase change materials (SSPCM) into delignified wood. The SSPCM was prepared by using polyethylene glycol (PEG) 1500 as the thermal energy storage ingredient, hexamethylene diisocyanate (HDI) as the cross-linking agent and castor oil (CO) as the skeleton material. The chemical composition and structure of SSPCM and PCESW were confirmed by fourier transform infrared spectroscopy (FTIR); the crystalline structure of PEG and SSPCM were tested by x-ray diffraction (XRD); the microstructure of PCESW was observed by scanning electron microscopy (SEM); thermal properties and durability of SSPCM and PCESW were investigated by differential scanning calorimetry (DSC) and thermogravimetric analysis (TG). The results showed that: (1) the porosity of wood was improved obviously after delignification and SSPCM mainly distributed in wood vessels; (2) PCESW-15 exhibited superior temperature-regulating performance and thermal stability; (3) PCESW-15 presented outstanding shape stability and no liquid leakage occurred during the phase transition. The great thermal performance of PCESWs suggested that it can be used as energy-saving building materials for indoor temperature regulating.

Thermal energy storage wood (TESW) was fabricated by using graphene aerogel encapsulated polyethylene glycol (PEG) as phase change material and wood as the matrix. The microstructure of TESW was investigated by scanning electron microscope (SEM), the thermal properties of TESW was determined by differential scanning calorimetry (DSC), thermal gravimetric analysis (TG) and laser flash diffusivity apparatus (LFA). The results showed that: (1) graphene aerogel (GA) encapsulated PEG composite was founded in the lumens of wood, there was no apparent interface between PEG and graphene aerogel; (2) the melting and freezing enthalpy of TESW were 11.81 and 27.91 J g−1, respectively. The melting and freezing point were 20 °C and 15 °C, respectively, which were suitable for human comfortable temperature; (3) incorporation of graphene aerogel improved the thermal conductivity of TESW apparently. Thermal conductivity of TESW was 0.374 W (m*K)−1, which increased about 274% compared to pure wood; (4) TG and hygroscopicity test indicated that the TESW had excellent thermal and dimensional stability. The TESW was suggested as energy conservation building material for indoor temperature regulating due to its comfortable phase change temperature and prior latent heat.

No abstract

No abstract