We report on a multi-petawatt 3-cascaded all-optical parametric chirped-pulse amplification laser facility. The experimental results demonstrate that the maximum energy after the final amplifier and after the compressor is 168.7 J and 91.1 J, respectively. The pulse width (FWHM) is 18.6 fs in full width at half maximum after optimization of pulse compression. Therefore, 4.9 PW peak power has been achieved for the laser facility. To the best of our knowledge, this is the highest peak power reported so far for an all-optical parametric chirped-pulse amplification facility, and a compressed pulse shorter than 20 fs is achieved in a PW-class laser facility for the first time.

We report a high-intensity laser facility named Xingguang-III that generates femtosecond, picosecond, and nanosecond beams with three wavelengths, i.e. 800 nm, 1053 nm, and 527 nm, respectively. To the best of our knowledge, the laser facility is the first one which produces three beams with different pulse widths and wavelengths. An optical synchronization technique, combining super continuum generation and femtosecond optical parametric amplification, was developed to ensure three beams are from the same source to achieve precise synchronization. The femtosecond beam is a double chirped-pulseamplification Ti:sapphire laser which applies cross-polarized wave generation to improve the temporal contrast. The picosecond/nanosecond beams utilize the optical parametric amplification + Nd:glass mixed amplification scheme. The output energy and pulse width of the three beams are 20.1 J/26.8 fs, 370.2 J/0.48 ps (shortest), and 575.4 J/1.0 ns, respectively. The smallest synchronization time (peak-to-valley) and the shot-to-shot timing jitter (peak-topeak) of less than 1.32 ps have been achieved for the femtosecond and picosecond beams.

No abstract

No abstract

No abstract