Large-aspect-ratio composite nanofibers with interior hierarchical interfaces are employed to break the adverse coupling of electric displacement and breakdown strength in flexible poly(vinylidene fluoride-hexafluoropropylene) nanocomposite films, a small loading of 3 vol% BaTiO3@TiO2 nanofibers gives rise to the highestenergy density (≈31.2 J cm(-3)) ever achieved in polymer nanocomposites dielectrics.

Developing high-performance film dielectrics for capacitive energy storage has been a great challenge for modern electrical devices. Despite good results obtained in lead titanate-based dielectrics, lead-free alternatives are strongly desirable due to environmental concerns. Here we demonstrate that giant energy densities of ~70 J cm−3, together with high efficiency as well as excellent cycling and thermal stability, can be achieved in lead-free bismuth ferrite-strontium titanate solid-solution films through domain engineering. It is revealed that the incorporation of strontium titanate transforms the ferroelectric micro-domains of bismuth ferrite into highly-dynamic polar nano-regions, resulting in a ferroelectric to relaxor-ferroelectric transition with concurrently improved energy density and efficiency. Additionally, the introduction of strontium titanate greatly improves the electrical insulation and breakdown strength of the films by suppressing the formation of oxygen vacancies. This work opens up a feasible and propagable route, i.e., domain engineering, to systematically develop new lead-free dielectrics for energy storage.

Manipulating microstructures of composites in three dimensions has been a long standing challenge. An approach is proposed and demonstrated to fabricate artificial nanocomposites by controlling the 3D distribution and orientation of oxide nanoparticles in a polymer matrix. In addition to possessing much enhanced mechanical properties, these nanocomposites can sustain extremely high voltages up to ≈10 kV, exhibiting high dielectric breakdown strength and low leakage current. These nanocomposites show great promise in resolving the paradox between dielectric constant and breakdown strength, leading to ultrahigh electrical energy density (over 2000% higher than that of the bench-mark polymer dielectrics) and discharge efficiency. This approach opens up a new avenue for the design and modulation of nanocomposites. It is adaptable to the roll-to-roll fabrication process and could be employed as a general technique for the mass production of composites with intricate nanostructures, which is otherwise not possible using conventional polymer processing techniques.

Polymers with high dielectric strength and favorable flexibility have been considered promising materials for dielectrics and energy storage applications, while the achievable energy density (U) of polymer is rather limited by the intrinsic low dielectric constant and ferroelectric hysteresis. Polyvinylidene fluoride-trifluoroethylene-chlorofluoroethylene (P(VDF-TrFE-CFE)) with ultrahigh ε of >50 is considered promising in achieving high U of polymer dielectrics. However, P(VDF-TrFE-CFE) only exhibits moderate U due to the early saturation of electrical polarization at low electric field. In this contribution, we show that, by blending P(VDF-TrFE-CFE) with polyvinylidene fluoride (PVDF), the early saturation of P(VDF-TrFE-CFE) is substantially suppressed, giving rise to concomitant enhancement of dielectric permittivity and breakdown strength. An ultrahigh energy density of 19.6 J/cm is thus achieved at ∼640 kV/mm, which is 1600% greater than U of the benchmark biaxially oriented polypropylene (BOPP, 1.2 J/cm at 640 kV/mm). Results of phase field simulations reveal that the interfaces between PVDF and P(VDF-TrFE-CFE) play a critical role by not only suppressing early saturation of electrical polarization in P(VDF-TrFE-CFE) but also inducing additional interfacial polarization. Binary phase diagram of P(VDF-TrFE-CFE)/PVDF blends is also systematically explored with their dielectric and energy storage behavior studied.