Hard carbon is one of the most promising anode materials for sodium‐ion batteries, but the low Coulombic efficiency is still a key barrier. In this paper, a series of nanostructured hard carbon materials with controlled architectures is synthesized. Using a combination of in situ X‐ray diffraction mapping, ex situ nuclear magnetic resonance (NMR), electron paramagnetic resonance, electrochemical techniques, and simulations, an “adsorption–intercalation” mechanism is established for Na ion storage. During the initial stages of Na insertion, Na ions adsorb on the defect sites of hard carbon with a wide adsorption energy distribution, producing a sloping voltage profile. In the second stage, Na ions intercalate into graphitic layers with suitable spacing to form NaC x compounds similar to the Li ion intercalation process in graphite, producing a flat low voltage plateau. The cation intercalation with a flat voltage plateau should be enhanced and the sloping region should be avoided. Guided by this knowledge, nonporous hard carbon material has been developed which has achieved high reversible capacity and Coulombic efficiency to fulfill practical application.

A honeycomb layered Na3Ni2SbO6 is synthesized as a cathode for sodium-ion batteries. This new host material exhibits a high capacity of 117 mA h g(-1), a remarkable cyclability with 70% capacity retention over 500 cycles at a 2C rate, and a superior rate capability with >75% capacity delivered even at a very high rate of 30 C (6000 mA g(-1)). These results open a new perspective to develop high-capacity and high-rate Na-ion batteries for widespread electric-energy-storage applications.

Current battery systems have severe cost and resource restrictions, difficultly to meet the large scale electric storage applications. Herein, we report an all-organic Na-ion battery using p-dopable polytriphenylamine as cathode and n-type redox-active poly(anthraquinonyl sulphide) as anode, excluding the use of transition-metals as in conventional electrochemical batteries. Such a Na-ion battery can work well with a voltage output of 1.8 V and realize a considerable specific energy of 92 Wh kg−1. Due to the structural flexibility and stability of the redox-active polymers, this battery has a superior rate capability with 60% capacity released at a very high rate of 16 C (3200 mA g−1) and also exhibit an excellent cycling stability with 85% capacity retention after 500 cycles at 8 C rate. Most significantly, this type of all-organic batteries could be made from renewable and earth-abundant materials, thus offering a new possibility for widespread energy storage applications.

Various morphologies of magnesium carbonate hydrates have been synthesized by carefully adjusting the reaction temperature and pH value of the initial reaction solution in the precipitation process. At lower temperatures (from room temperature to 328 K) and lower pH values (variation with the reaction temperature), magnesium carbonate hydrates are prone to display needlelike morphology, and the axis diameter of the particles decreases with the increase of reaction temperature and pH value. With the further increase of the reaction temperature (333-368 K) and pH value, the sheetlike crystallites become the preferred morphology, and at higher temperatures and pH values, these crystallites tend to assemble into layerlike structures with diverse morphologies, such as spherical-like particles with rosette-like structure and cakelike particles built from sheetlike structure. Fourier transform infrared (FT-IR) spectra show that these various morphologies are closely related to their compositions. The needlelike magnesium carbonate hydrate has a formula of MgCO3.xH2O, in which the value x is greatly affected by the experimental conditions, whereas with the morphological transformation from needlelike to sheetlike structure, their corresponding compositions also change from MgCO3.xH2O to Mg5(CO3)4(OH)2.4H2O in the interval of 328-333 K.