An optical fiber magnetic field sensor based on the single-mode-multimode-single-mode (SMS) structure and magnetic fluid (MF) is proposed and demonstrated. By using a piece of no-core fiber as the multimode waveguide in the SMS structure and MF sealed in a capillary tube as the magnetic sensitive media, which totally immersing the no-core fiber, an all-fiber magnetic sensor was fabricated. Interrogation of the magnetic field strength can be achieved either by measuring the dip wavelength shift of the transmission spectrum or by detecting the transmission loss at a specific wavelength. A demonstration sensor with sensitivities up to 905 pm/mT and 0.748 dB/mT was fabricated and investigated. A theoretical model for the design of the proposed device was developed and numerical simulations were performed.

In this Letter, we report on a fiber-optic Fabry-Perot interferometric pressure sensor with its external diaphragm surface thinned and roughened by a femtosecond laser. The laser-roughened surface helps to eliminate outer reflections from the external diaphragm surface and makes the sensor immune to variations in the ambient refractive index. The sensor is demonstrated to measure pressure in a high-temperature environment with low-temperature dependence.

This Letter reports a polymer optical fiber (POF) based large strain sensor based on the multimode interference (MMI) theory for the application of structural health monitoring. A section of POFs is sandwiched between two silica single mode fibers to construct a single-mode-multimode-single-mode structure that produces a MMI spectrum. The strain sensing mechanism of the device was investigated and experimentally verified. A large dynamic range of 2×10(4) με (2%) and a detection limit of 33 µε have been demonstrated.

Small size fiber optic devices integrated with chemically sensitive photonic materials are emerging as a new class of high-performance optical chemical sensor that have the potential to meet many analytical challenges in future clean energy systems and environmental management. Here, we report the integration of a proton conducting perovskite oxide thin film with a long-period fiber grating (LPFG) device for high-temperature in situ measurement of bulk hydrogen in fossil- and biomass-derived syngas. The perovskite-type Sr(Ce(0.8)Zr(0.1))Y(0.1)O(2.95) (SCZY) nanocrystalline thin film is coated on the 125 microm diameter LPFG by a facile polymeric precursor route. This fiber optic sensor (FOS) operates by monitoring the LPFG resonant wavelength (lambda(R)), which is a function of the refractive index of the perovskite oxide overcoat. At high temperature, the types and population of the ionic and electronic defects in the SCZY structure depend on the surrounding hydrogen partial pressure. Thus, varying the H(2) concentration changes the SCZY film refractive index and light absorbing characteristics that in turn shifts the lambda(R) of the LPFG. The SCZY-coated LPFG sensor has been demonstrated for bulk hydrogen measurement at 500 degrees C for its sensitivity, stability/reversibility, and H(2)-selectivity over other relevant small gases including CO, CH(4), CO(2), H(2)O, and H(2)S, etc.