Regenerated silk fibroin (RSF)/graphene oxide (GO) hybrid silk fibers were dry-spun from a mixed dope of GO suspension and RSF aqueous solution. It was observed that the presence of GO greatly affect the viscosity of RSF solution. The RSF/GO hybrid fibers showed from FTIR result lower β-sheet content compared to that of pure RSF fibers. The result of synchrotron radiation wide-angle X-ray diffraction showed that the addition of GO confined the crystallization of silk fibroin (SF) leading to the decrease of crystallinity, smaller crystallite size, and new formation of interphase zones in the artificial silks. Synchrotron radiation small-angle X-ray scattering also proved that GO sheets in the hybrid silks and blended solutions were coated with a certain thickness of interphase zones due to the complex interaction between the two components. A low addition of GO, together with the mesophase zones formed between GO and RSF, enhanced the mechanical properties of hybrid fibers. The highest breaking stress of the hybrid fibers reached 435.5 ± 71.6 MPa, 23% improvement in comparison to that of degummed silk and 72% larger than that of pure RSF silk fiber. The hybrid RSF/GO materials with good biocompatibility and enhanced mechanical properties may have potential applications in tissue engineering, bioelectronic devices, or energy storage.

As the perfect combination of strength and luster, silkworm silks have been widely used in many fields but still need improvements. This paper demonstrates an in vivo uptake of titanium dioxide (TiO 2 ) nanoparticles by silkworms, leading to the direct production of intrinsically modified silk. The nanoparticles can be easily incorporated into the silk gland of silkworm by using this method due to the interactions between TiO 2 and silk fibroin molecules. Infrared spectra indicate that TiO 2 nanoparticles confine the conformation transition of silk fibroin from random coil/α-helix to β-sheet. Results of synchrotron radiation wide-angle X-ray diffraction and small-angle X-ray scattering suggest that modified silks have lower crystallinity, higher mesophase content, and higher Herman's orientation functions of crystalline region and mesophase region than control group. The breaking strength and elongation at break of the modified silk can be improved up to 548 ± 33 MPa and 16.7 ± 0.8%, respectively, by adding 1% nanoanatase into the artificial diet. Moreover, the TiO 2 -1% modified silk shows well-improved ultraviolet resistant property as the breaking strength only decreased 15.9% after exposure to ultraviolet light for 3 h. The in vivo modification method for silkworm silk is a green, sustainable, and promising route for commercial production in the future.

Spiders achieve superior silk fibres by controlling the molecular assembly of silk proteins and the hierarchical structure of fibres. However, current wet-spinning process for recombinant spidroins oversimplifies the natural spinning process. Here, water-soluble recombinant spider dragline silk protein (with a low molecular weight of 47 kDa) was adopted to prepare aqueous spinning dope. Artificial spider silks were spun via microfluidic wet-spinning, using a continuous post-spin drawing process (WS-PSD). By mimicking the natural spinning apparatus, shearing and elongational sections were integrated in the microfluidic spinning chip to induce assembly, orientation of spidroins, and fibril structure formation. The additional post-spin drawing process following the wet-spinning section partially mimics the spinning process of natural spider silk and substantially contributes to the compact aggregation of microfibrils. Subsequent post-stretching further improves the hierarchical structure of the fibres, including the crystalline structure, orientation, and fibril melting. The tensile strength and elongation of post-treated fibres reached up to 510 MPa and 15%, respectively.

No abstract

No abstract